SRAM DB6 4-Piston Hydraulic Disc Brake Set - Front + Rear + Centre Lock Rotors
SKU code: SRM-DB6-BRAKESET
Customise Your Purchase
Brakes
SRAM DB6 Hydraulic Disc Brake, Right Lever (Front)
$165.00
SRAM DB6 Hydraulic Disc Brake, Left Lever (Rear),
$165.00
Rotors (optional)
SRAM Centerline Disc Brake Rotor 160mm, CenterLock
$81.00
SRAM Centerline Disc Brake Rotor 180mm, CenterLock
$91.00
SRAM Centerline Disc Brake Rotor 200mm, CenterLock
$101.00
SRAM DB6 4-piston hydraulic disc brakes, front and rear, with rotors
A complete 4-piston hydraulic disc brake upgrade for trail, enduro and e-MTB riding: two pre-bled SRAM DB6 brakes (lever, hose and caliper DB6 with organic pads) plus a pair of Centerline rotors. Each brake arrives assembled and bled with its hose fitted, so the rear bolts on without a bleed; both DB6 brakes come with a 2000 mm hose, so the front hose is usually shortened and re-bled to fit.
Kit includes
- Front: DB6 4-piston post-mount caliper with its lever and 2000 mm hose, pre-bled (fitted on the right in Australia)
- Rear: DB6 caliper with its lever and 2000 mm hose, pre-bled (fitted on the left in Australia)
- 2 x Centerline Centre Lock rotors, 180 mm
- MatchMaker X (MMX) handlebar clamps, as supplied with each SRAM brake
Options
Rotor sizes: Centre Lock: Centerline 160, 180, 200 mm. The kit defaults to two 180 mm (Centerline); set that row to 0 and pick another size, or mix sizes (a larger rotor at the front is common). DB6 takes SRAM rotors up to 220 mm, the largest SRAM makes; SRAM publishes no per-model minimum, so this kit starts at 160 mm.
Fit-up parts, sold separately (linked here and shown with this kit): SRAM mount adapters (20 P-1 for a 160 mm post mount to a 180 mm rotor; 20 S for a 160 mm post mount to a 180 mm rotor, or 180 mm post mount to a 200 mm rotor; 40 P for a 160 mm post mount to a 200 mm rotor; 40 IS for an IS rear mount to a 180 mm rotor), spare pads (Large organic steel-backed; Large sintered steel-backed), SRAM mineral oil (Maxima Mineral Brake Oil only), a bleed kit, SRAM mineral Bleeding Edge fitting for bleeding. Add what your bike needs to the cart alongside the kit.
This kit is the Centre Lock version - ask us for 6-bolt rotors if your hubs need them.
Already have rotors? Untick them and the price follows the parts you keep. Every part in this kit can be deselected, so a bike that only needs one end, or already has the right rotors, is not charged for the rest.
Fitting notes
Australian convention: the right-hand lever works the front brake and the left-hand lever the rear; the sets are built that way. Most post-mount forks and frames take a 160 mm rotor directly; check your fork or frame's native size - a larger rotor needs the matching SRAM adapter only when the mount is smaller than the rotor (the matching adapters are linked above and shown with this kit). SRAM supplies each brake with its MMX clamp but without a rotor or mounting bracket. Centerline rotors are 1.85 mm thick and made for SRAM calipers. SRAM supplies the DB6 with a 2000 mm hose at both ends: the front hose is longer than most bikes need and is normally cut to length and bled (Tune Cycles does this when we fit the set). The 2000 mm rear hose suits most frames; very large frames or high-rise bars may need a longer hose fitted and bled by a workshop. Service fluid: SRAM mineral oil (Maxima Mineral Brake Oil only); never DOT fluid.
Tune Cycles supplies and fits these brakes. Choose your options above; if you are unsure what your fork, frame or hubs take, ask us before you order.
Every part in this kit is covered by SRAM's manufacturer warranty against defects in materials and workmanship. Brake pads and rotors are wear items; wear from normal use, incorrect installation, crash damage or modification is not covered. For any warranty claim or support, return the part to Tune Cycles and we will handle it with SRAM.
- DB6 4-piston post-mount hydraulic caliper, front and rear, organic pads
- DB6 lever: aluminium blade, tooled reach adjust - fitted right = front, left = rear
- Assembled and pre-bled sets, 2000 mm hose on both - the front is usually shortened and re-bled to fit
- Two 180 mm Centerline Centre Lock rotors included (1.85 mm thick)
- Rotor options: Centre Lock 160, 180, 200 mm - mix front and rear sizes
- Rotor range for DB6: 160-220 mm (220 mm max per SRAM's rotor range; 160 mm minimum assumed, not a SRAM specification)
- Hydraulic system: SRAM mineral oil (Maxima Mineral Brake Oil only)
- MatchMaker X (MMX) clamps included; rotor and mounting bracket are the kit's rotor rows and adapter options
- Sold separately, linked in the description: post-mount adapters, spare pads, oil, bleed kit
- Editable kit: deselect any part you already have; the price follows the parts you keep
| Brand | SRAM |
| Series | SRAM DB6 |
| Caliper | DB6, 4-piston, post-mount |
| Lever | aluminium blade, tooled reach adjust |
| Build | Front and rear brakes, assembled and bled, hoses fitted |
| Hose lengths | front 2000 mm, rear 2000 mm |
| Pads fitted | organic pads |
| Fluid | SRAM mineral oil (Maxima Mineral Brake Oil only) |
| Rotors included | 2 x Centerline 180 mm Centre Lock |
| Rotor options | Centre Lock: Centerline 160, 180, 200 mm |
| Rotor range (caliper) | 160-220 mm (max per SRAM; minimum assumed) |
| Clamp | MatchMaker X (MMX) included |
| Compatible pads | SRAM Large pads |
| Adapters (sold separately) | 20 P-1 (a 160 mm post mount to a 180 mm rotor); 20 S (a 160 mm post mount to a 180 mm rotor, or 180 mm post mount to a 200 mm rotor); 40 P (a 160 mm post mount to a 200 mm rotor); 40 IS (an IS rear mount to a 180 mm rotor) |
| Spare pads (sold separately) | Large organic steel-backed; Large sintered steel-backed |
| Oil (sold separately) | SRAM Maxima Mineral Brake Oil, 4 fl oz (118ml), Wide-Mouth Bottle |
| Bleed kit (sold separately) | Bleed Kit, Universal, compatible with Avid/SRAM, Hayes, Magura, Clarks, Shimano, Tektro, Hope |
| SKU | SRM-DB6-BRAKESET |
| Brand | SRAM |
| Shipping Weight | 0.9000kg |
| Shipping Width | 0.300m |
| Shipping Height | 0.120m |
| Shipping Length | 0.450m |