The 20P-1 is SRAM's 20mm post mount adapter for stepping up one rotor size, from 140 to 160mm or from 160 to 180mm. It's the 20mm bracket SRAM specifies for Maven brakes with rotors up to 180mm.

Highlights

  • Post mount to post mount, +20mm
  • For 160mm and 180mm rotors only
  • Aluminium bracket, stainless bracket mounting bolts included
  • Replaces the older 20P bracket on Maven

Compatibility and fit

SRAM says Maven needs the 20P-1 (180mm) or 20P-2 (200 and 220mm) whenever a 20mm adapter is used, as the old 20P bracket won't fit Maven calipers. SRAM also notes the 20P-1 and 20P-2 are not compatible with BB5, BB7, Guide RE or Avid Code calipers. Fit to the torque in SRAM's caliper mounting specifications and align the caliper to the rotor, or book it in with our workshop.

This SRAM component is covered by SRAM’s warranty against defects in materials and workmanship; terms are set by SRAM. Wear and service items (chains, cassettes, brake pads, rotors, tape and seals) are normal maintenance parts.

Tune Cycles can supply, fit and set up SRAM components and lodge any warranty assessment on your behalf — book at tunecycles.com.au/book.

  • SRAM post mount bracket 20P-1
  • Raises the caliper 20mm: 140 to 160mm or 160 to 180mm
  • For 160mm and 180mm rotors only
  • Aluminium bracket
  • Stainless bracket mounting bolts included
  • Specified by SRAM for Maven when a 20mm adapter is needed
BrandSRAM
TypePost mount bracket, 20P-1
SRAM part number00.5318.007.009
Rotor size increase+20mm (140 to 160mm, or 160 to 180mm)
Rotor sizes160mm and 180mm only
MaterialAluminium
HardwareStainless bracket mounting bolts included
Not compatible withBB5, BB7, Guide RE, Avid Code calipers
SKU PSI-SR005318007009
Brand SRAM
Shipping Weight 0.4000kg
Shipping Width 0.160m
Shipping Height 0.060m
Shipping Length 0.220m