SRAM's Centerline rotor in a 160mm CenterLock fit, with a black centre and an internal-tool SRAM lockring in the box. The Centerline brake track is designed for smooth, consistent and quiet braking, and SRAM rates it for road, gravel and mountain bikes.

Highlights

  • Centerline rotor, 160mm diameter, CenterLock mount
  • 1.85mm thick; replace once worn below 1.55mm
  • Rounded outer edge makes wheel installs easier and is UCI-compliant
  • SRAM rates Centerline for both road and mountain bike brakes
  • SRAM CenterLock lockring included (internal-tool type)

Choosing 160mm

SRAM's sizing guide puts 140–160mm rotors on most road, cyclocross and gravel bikes and 160–180mm on XC bikes. Most drop-bar frames only take 140 or 160mm.

Compatibility and fit

Needs a CenterLock (splined) hub. Check that your frame and fork accept a 160mm rotor and that you have the correct caliper adaptor. The included lockring is an internal-tool type; some thru-axle hubs need an external-tool lockring instead, so check your hub before fitting. Bed in new rotors and pads before riding hard, and fit a new rotor whenever you change pad compound.

This SRAM component is covered by SRAM’s warranty against defects in materials and workmanship; terms are set by SRAM. Wear and service items (chains, cassettes, brake pads, rotors, tape and seals) are normal maintenance parts.

Tune Cycles can supply, fit and set up SRAM components and lodge any warranty assessment on your behalf — book at tunecycles.com.au/book.

  • SRAM Centerline disc brake rotor (RT-CLN-A2)
  • 160mm diameter
  • CenterLock mounting
  • SRAM CenterLock lockring included (internal-tool type)
  • 1.85mm thickness, 1.55mm minimum
  • Rounded, UCI-compliant outer edge
  • Black centre
BrandSRAM
ModelCenterline (RT-CLN-A2)
SRAM part number00.5018.037.037
Diameter160mm
MountCenterLock
Thickness1.85mm
Minimum thickness1.55mm
Edge profileRounded, UCI-compliant
LockringIncluded (internal-tool)
ColourBlack
SKU PSI-SR005018037037
Brand SRAM