Internal cable routing keeps the front end clean, but it brings complex specs and rust-prone headset bearings. TOKEN's 4-in-1 Bearing Kit is purpose-built for internal-routing headsets and covers the four major systems, TOKEN, ACROS, FSA and Deda, in one box, here with Premium high-carbon steel bearings.

Highlights

  • One kit for TOKEN, ACROS, FSA and Deda internal-routing headset systems
  • Two Premium high-carbon steel bearings, 51.8 x 40 x 7 mm, 45° x 45°
  • Double-chamfered bearings help protect cables from contact damage
  • Patented steerer tube protector where the cables meet the fork
  • Upper bearing shield keeps moisture out from above for longer bearing life
  • 88 g per set

What's in the kit

Per TOKEN's parts list: steerer protector; multi-function top cover spacer; 1.2 mm spacer for ACROS; compression rings for TOKEN, TOKEN 1.0, ACROS, FSA and Deda; micro spacers for TOKEN 1.0 and Deda; upper bearing shield; bearing conical spacer for ACROS; two Premium bearings.

Cups, a crown race and a top cover are not included.

Fitting notes

TOKEN's manual shows which parts each system uses. Add the multi-function top cover spacer when the gap between the head tube and top cover is smaller than 0.5 mm on a TOKEN system, or when the top cover touches the head tube on an ACROS or FSA system, and trim the unneeded parts of the spacer with cutting pliers.

Compatibility & fit

For internal cable routing headsets using the TOKEN, ACROS, FSA or Deda system, in head tubes with SHIS IS52 or ZS56 bearing seats. Bearings: 51.8 mm outside diameter, 40 mm inside diameter, 7 mm high, 45° x 45°. Steerer: 1-1/8" at the top; FES lists the fork as 1-1/8" + 1.5" (tapered).

FSA systems: TOKEN's diagram uses a 36° x 45° lower bearing (TOKEN TK518H65), sold separately, so an FSA set-up needs that bearing as well as this kit.

Identify which system your frame uses before ordering; the kit carries the compression ring for each one. Headset service and bearing replacement are a separate workshop service and aren't included in the price. Our workshop can identify your headset system and fit the kit.

TOKEN warrants this product against defects in materials or workmanship for two years from the original date of purchase, for the original purchaser with dated proof of purchase. Normal wear and tear, bearings (unless unused), and damage from incorrect installation, modification, neglect or improper maintenance are not covered; TOKEN repairs or replaces a defective product at its discretion. This is in addition to your rights under the Australian Consumer Law.

For warranty support, return the product to Tune Cycles and we'll manage the claim with TOKEN's Australian distributor.

  • Fits TOKEN, ACROS, FSA and Deda internal-routing headset systems
  • Two Premium high-carbon steel bearings, 51.8 x 40 x 7 mm, 45° x 45°
  • Double-chamfered bearings protect cables from contact damage
  • Patented steerer tube protector and upper bearing shield included
  • 88 g per set
Product code TK1541D
Headset type Cable Box (internal cable routing) bearing kit
Systems TOKEN, ACROS, FSA, Deda
SHIS code IS52 & ZS56
Steerer 1-1/8" (fork 1-1/8" + 1.5" per FES)
Bearings 2 x Premium high-carbon steel
Bearing size 51.8 x 40 x 7 mm, 45° x 45°
Weight 88 g / set
Colour Black
In the kit Steerer protector; multi-function top cover spacer; 1.2 mm spacer for ACROS; compression rings for TOKEN, TOKEN 1.0, ACROS, FSA and Deda; micro spacers for TOKEN 1.0 and Deda; upper bearing shield; bearing conical spacer for ACROS; two Premium bearings
Not included Cups, crown race, top cover; 36° x 45° lower bearing for FSA systems (TK518H65)
SKU FES-CHA1541D-KIT
Brand TOKEN
Shipping Weight 0.2000kg
Shipping Width 0.160m
Shipping Height 0.060m
Shipping Length 0.220m