Zwift Cog and Click v2 Upgrade Kit for Elite Smart Trainers – 18T
SKU code: FES-ZC02-P-CCE000
Add virtual shifting to a compatible Elite smart trainer. The Zwift Cog comes pre-installed on a Elite-compatible freehub, and the Zwift Click v2 controllers let you shift, steer, navigate menus and give Ride Ons from your handlebars, with 24 silent, instant virtual gears.
Highlights
- 24 silent, instant virtual gears in Zwift
- Zwift Cog with a 18T steel sprocket, pre-installed on a Elite-compatible freehub
- 10 sprocket positions for quick chain alignment
- Zwift Click v2 dual controllers: shift, steer, navigate menus and give Ride Ons
- Set up with no special tools
- For direct-drive smart trainers only
Virtual shifting
Zwift Cog and Click give you 24 gears with no lateral chain movement, so there's less chain wear and no shifting noise: just smooth shifts and full control.
Adjustable sprocket
The sprocket has 10 positions, so lining the chain up with your trainer is quick and easy.
Zwift Click v2
Two handlebar controllers connect over Bluetooth and run on CR2032 coin cell batteries rated at more than 100 hours.
Compatibility & fit
This kit is for Elite trainers only and carries the 18T Cog that Zwift specifies for Elite. Zwift lists these Elite smart trainers as Zwift Cog compatible: Avanti, Direto, Direto X, Direto XR, Direto XR Team, Direto XR-T, Justo, Justo 2, Rivo, Suito and Suito-T. Check your model against Zwift's compatibility list before ordering.
For direct-drive indoor trainers only. Zwift says Zwift Cog suits most 8- to 13-speed bikes, and lists the Campagnolo N3W 13-speed chain and some 2018–2021 Specialized Stumpjumper models as not compatible. The Cog is designed to fit a Shimano Hyperglide freehub body and is not compatible with Shimano Micro Spline, SRAM XD/XDR or Campagnolo freehub bodies; in this kit it comes pre-installed on a Elite-compatible freehub.
After fitting, Zwift says to update the trainer to its latest firmware in the trainer manufacturer's app to enable virtual shifting. Zwift Click controls the Zwift app.
Not for Wahoo or Garmin Tacx trainers: choose the matching Zwift Cog and Click kit for those.
Set-up needs no special tools. If you'd like it done for you, fitting and chain alignment are a separate workshop service and aren't included in the price.
Battery safety: Zwift Click uses CR2032 coin cell batteries. Keep new and used batteries out of reach of children. Swallowing a coin cell can cause severe or fatal injuries, and severe burns can occur within 2 hours. If you think a battery has been swallowed or placed inside any part of the body, seek medical attention immediately, or call the Poisons Information Centre on 13 11 26.
Zwift hardware is covered against defects in materials and workmanship under normal indoor use. This is in addition to your rights under the Australian Consumer Law.
For warranty support, return the product to Tune Cycles and we'll manage the claim with Zwift's Australian distributor.
- 24 silent, instant virtual gears
- Zwift Cog with a 18T steel sprocket, pre-installed on a Elite-compatible freehub
- 10 sprocket positions for chain alignment
- Zwift Click v2 dual controllers, Bluetooth, CR2032, more than 100 h battery life
- Direct-drive smart trainers only
| Cog | 18T, steel sprocket; plastic housing and lockring |
|---|---|
| Sprocket positions | 10 |
| Freehub | Elite-compatible, Cog pre-installed |
| Virtual gears | 24 |
| Trainer | Zwift Cog compatible Elite direct-drive smart trainers |
| Bike drivetrain | Most 8- to 13-speed (Zwift) |
| Zwift Click v2 dimensions | 4.83 x 4.83 cm |
| Zwift Click v2 weight | 58.2 g |
| Communication | Bluetooth |
| Battery | CR2032 coin cell |
| Battery life | More than 100 hours |
| In the box | Zwift Cog with pre-installed 18T cog and Elite-compatible freehub; Zwift Click v2 dual controllers; quick start guide |
| SKU | FES-ZC02-P-CCE000 |
| Brand | Zwift |
| Shipping Weight | 0.6000kg |
| Shipping Width | 0.200m |
| Shipping Height | 0.100m |
| Shipping Length | 0.250m |