Zipp's own tubeless valve and tape kit for its 808 Firecrest and 858 NSW (D1) wheels, for re-taping a rim and fitting fresh valves when setting up tubeless or when old tape starts to leak.

Highlights

  • 10 metres of 26mm tubeless rim tape
  • Two universal tubeless valves, 100mm long
  • Valve core wrench included
  • Listed by Zipp for 808 Firecrest and 858 NSW (D1)
  • Sealant not included

Fitting

Zipp's tape service manual calls for two full wraps on 808 tubeless rims and one on 858 tubeless rims, with the start overlapped by about 15cm and the tape seated into the rim channel for an airtight seal. Fit it yourself with the manual, or have our workshop do it.

Compatibility and fit

Zipp's 2026 spare parts catalogue lists this kit for 808 Firecrest and 858 NSW (D1) wheels. The 858 NSW B1 and 808 NSW take a different kit with 23mm tape. Check your wheel model before ordering.

This SRAM component is covered by SRAM’s warranty against defects in materials and workmanship; terms are set by SRAM. Wear and service items (chains, cassettes, brake pads, rotors, tape and seals) are normal maintenance parts.

Tune Cycles can supply, fit and set up SRAM components and lodge any warranty assessment on your behalf — book at tunecycles.com.au/book.

  • 10m roll of 26mm tubeless rim tape
  • 2 x universal tubeless valves, 100mm
  • 1 x valve core wrench
  • For Zipp 808 Firecrest and 858 NSW (D1)
  • Zipp part number 11.1918.084.004
BrandZipp
Part typeTubeless valve and tape kit
Rim tape26mm wide x 10m
Valves2 x universal tubeless, 100mm
ToolValve core wrench
Listed for808 Firecrest and 858 NSW (D1)
SealantNot included
SRAM part number11.1918.084.004
SKU PSI-ZP111918084004
Brand Zipp
Shipping Weight 0.1000kg
Shipping Width 0.160m
Shipping Height 0.060m
Shipping Length 0.220m