Zipp's own tubeless valve and tape kit for its 303 Firecrest, 303 SW, 303 S and 353 NSW wheels, for re-taping a rim and fitting fresh valves when setting up tubeless or when old tape starts to leak.

Highlights

  • 10 metres of 26mm tubeless rim tape
  • Two universal tubeless valves, 60mm long
  • Valve core wrench included
  • Listed by Zipp for 303 Firecrest, 303 SW, 303 S and 353 NSW
  • Sealant not included

Fitting

Zipp's tape service manual calls for one full wrap on 303 and 353 tubeless rims, with the start overlapped by about 15cm and the tape seated into the rim channel for an airtight seal. Fit it yourself with the manual, or have our workshop do it.

Compatibility and fit

Zipp's 2026 spare parts catalogue lists this kit for 303 Firecrest, 303 SW, 303 S and 353 NSW wheels. Wheels fitted with a Zipp AXS wheel sensor (303 SW A1 and 353 NSW B1) use a sensor-specific valve, sold separately. Check your wheel model before ordering.

This SRAM component is covered by SRAM’s warranty against defects in materials and workmanship; terms are set by SRAM. Wear and service items (chains, cassettes, brake pads, rotors, tape and seals) are normal maintenance parts.

Tune Cycles can supply, fit and set up SRAM components and lodge any warranty assessment on your behalf — book at tunecycles.com.au/book.

  • 10m roll of 26mm tubeless rim tape
  • 2 x universal tubeless valves, 60mm
  • 1 x valve core wrench
  • For Zipp 303 Firecrest, 303 SW, 303 S and 353 NSW
  • Zipp part number 11.1918.084.001
BrandZipp
Part typeTubeless valve and tape kit
Rim tape26mm wide x 10m
Valves2 x universal tubeless, 60mm
ToolValve core wrench
Listed for303 Firecrest, 303 SW, 303 S and 353 NSW
SealantNot included
SRAM part number11.1918.084.001
SKU PSI-ZP111918084001
Brand Zipp
Shipping Weight 0.1000kg
Shipping Width 0.160m
Shipping Height 0.060m
Shipping Length 0.220m