Based on the Flow rims that have won World Cup DH and Enduro World Series races, the Flow S2 front wheel gives riders an easy-upgrade route to better tubeless performance and durability.

Highlights

Low-profile 30mm internal width, optimised for 2.3–2.6″ tyres
6061 aluminium rim with a sleeved joint and stainless steel rim eyelets
Patented Bead Socket Technology (BST) for easy tubeless inflation and a reliable seal
E-sync hub with 8.18° engagement and reinforced pawls
Cromoly axle and double-row Enduro bearings for a 47% increase in max torque capacity over Neo hubs
Tubeless ready with rim tape pre-installed

Rim & hub

A reinforced, eyeletted spoke bed and a sleeved joint back the 6061 alloy construction, and the 30mm internal width suits 2.3–2.6″ tyres. The E-sync hub is built with cromoly steel axles, double-row Enduro bearings and heat-treated steel ratchet rings for durability, while four pawls need only 8.18° of rotation to engage.

Compatibility & fit

This wheel is built for a 15×110mm Boost front axle with a 6-bolt disc rotor mount. Our workshop can handle tubeless tyre set-up on request.

Stan's NoTubes backs its wheels, rims, hubs and accessories against defects in materials and workmanship for the original owner under its published warranty policy; it excludes misuse, crash damage outside a registered crash-replacement claim, and normal wear and tear. For warranty support, return the product to Tune Cycles and we'll manage the claim with JetBlack Cycling, Stan's NoTubes' Australian distributor. For warranty support, return the product to Tune Cycles and we'll manage the claim with JetBlack Cycling, Stan's NoTubes' Australian distributor.

Low-profile 30mm internal width for 2.3–2.6″ tyres, 6061 aluminium rim, sleeved joint, stainless steel eyelets, Bead Socket Technology (BST) tubeless-ready rim, E-sync hub, 8.18° engagement, reinforced pawls, Cromoly axle, double-row Enduro bearings, Tubeless ready with rim tape pre-installed

Wheel position	Front
Axle	15×110mm (Boost)
Brake mount	6-bolt disc
Wheel size	27.5″
Rim internal width	30mm
Rim material	6061 aluminium alloy
Hub	E-sync, cromoly axle, double-row Enduro bearings
Lacing	Traditional J-bend, single spoke length
Tyre range	2.3–2.6″

SKU	JET-NT-DWF270001
Brand	Stan's
Shipping Weight	1.4000kg
Shipping Width	0.700m
Shipping Height	0.120m
Shipping Length	0.700m

More From This Category

Scope Artech 8.T Carbon Triathlon Front Wheel

From $3,640.00

DT Swiss M 1900 SPLINE 30 Disc Brake Front Wheel —

RRP ~~$332.53~~ $305.01

DT Swiss G 1800 SPLINE 24 Disc Brake Front Wheel —

RRP ~~$378.45~~ $347.13

DT Swiss ARC 1400 DICUT 80 Disc Brake Front Wheel

RRP ~~$1,434.60~~ $1,315.88

DT Swiss ARC 1400 DICUT 38 Disc Brake Front Wheel

RRP ~~$1,434.60~~ $1,315.88

DT Swiss M1900 Spline All Mountain Front Wheel

From $331.99

DT Swiss G 1800 SPLINE 24 Disc Brake Front Wheel —

RRP ~~$323.09~~ $296.35

DT Swiss GRC 1400 SPLINE 50 Disc Brake Front Wheel

RRP ~~$1,471.75~~ $1,349.95

Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Tune Cycles’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.

The term ‘Tune Cycles’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is 54/76B Edinburgh Road, MARRICKVILLE, NSW, 2204, AU. Our ABN is 84 611 693 513. The term ‘you’ refers to the user or viewer of our website.

The use of this website is subject to the following terms of use:

The content of the pages of this website is for your general information and use only. It is subject to change without notice.
Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on this website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
This website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
All trademarks reproduced in this website, which are not the property of, or licensed to the operator, are acknowledged on the website.
Unauthorised use of this website may give rise to a claim for damages and/or be a criminal offence.
From time to time, this website may also include links to other websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the website(s). We have no responsibility for the content of the linked website(s).
Your use of this website and any dispute arising out of such use of the website is subject to the laws of Australia.

Description

Rim & hub

Compatibility & fit

Warranty

Features

Specifications

More From This Category

for news and special member-only offers and discounts

Terms & Conditions

Privacy Policy