Maven is SRAM's extreme-duty mountain bike brake, made for gravity, enduro, trail and eMTB riding, or anyone who wants more stopping power on tap. Maven Ultimate is the top of the range: the B1 version adds a carbon lever blade, with a clear anodised finish, machined caliper edges and titanium caliper hardware. This is the front brake with a 950mm hose.

Highlights

  • Four 18mm pistons in a stiff, two-piece forged aluminium caliper
  • Re-tuned SwingLink for smoother power and lighter engagement
  • Tool-free Reach Adjust and Contact Point Adjust
  • Carbon lever blade on a bearing pivot
  • Stealth lever architecture; runs SRAM Mineral Oil
  • Organic pads, MMX clamp and 20P-2 post bracket included

What changed for B1

SRAM updated the lever blades, re-tuned the SwingLink for smoother modulation and less hand fatigue, and moved the caliper to four 18mm pistons. SRAM says braking power is unchanged from the A1 Maven.

Tune it to your riding

SRAM suggests starting with the smallest rotor your frame and fork accept, then tuning with rotor size and pad compound. Each 20mm step up in rotor size adds about 14% mechanical power.

Compatibility and fit

Post-mount caliper; rotor not included (SRAM recommends HS2). Maven needs SRAM's 20P-1 or 20P-2 brackets where a 20mm adaptor is required, not the older 20P; the included 20P-2 suits 200 and 220mm rotors. SRAM's MTB levers are ambidextrous; the 950mm hose is SRAM's front-brake length. The caliper's Bleeding Edge fitting only takes SRAM's Mineral Oil bleed kit, so hose shortening and bleeding need that kit and SRAM's manual, or a workshop.

This SRAM component is covered by SRAM’s warranty against defects in materials and workmanship; terms are set by SRAM. Wear and service items (chains, cassettes, brake pads, rotors, tape and seals) are normal maintenance parts.

Tune Cycles can supply, fit and set up SRAM components and lodge any warranty assessment on your behalf — book at tunecycles.com.au/book.

  • SRAM Maven Ultimate B1 hydraulic disc brake (DB-MVN-ULT-B1), front
  • 950mm hose, Stealth lever architecture
  • Four 18mm phenolic pistons, two-piece forged aluminium caliper
  • Tool-free Reach Adjust and Contact Point Adjust
  • Carbon lever blade on a bearing pivot
  • SRAM Mineral Oil with Bleeding Edge caliper bleed port
  • Organic pads, MMX clamp and 20P-2 post bracket included
  • Clear anodised finish, machined caliper edges and titanium caliper hardware
BrandSRAM
ModelMaven Ultimate (DB-MVN-ULT-B1)
SRAM part number00.5018.259.000
ApplicationMTB
Brake typeHydraulic disc
PositionFront
Hose length950mm
Hose routingStealth lever
CaliperFour-piston, two-piece forged aluminium, post mount
Pistons4 x 18mm, phenolic
Caliper hardwareTitanium
Lever bladeCarbon
Lever bodyForged aluminium
Lever pivotBearing
AdjustmentTool-free reach, contact point
FluidSRAM Mineral Oil
Bleed portBleeding Edge (mineral oil)
Pads suppliedOrganic, steel-backed
IncludedMMX clamp, 20P-2 post bracket
RotorNot included (SRAM recommends HS2)
ColourClear anodised
SKU PSI-SR005018259000
Brand SRAM
Shipping Weight 0.1500kg
Shipping Width 0.160m
Shipping Height 0.060m
Shipping Length 0.220m