The Force Aero brake puts SRAM road hydraulic braking on a time trial or triathlon bar. This front set pairs the aero lever with a two-piston Flat Mount caliper on a 1100mm hose.

Highlights

  • Power and modulation tuned by SRAM for triathlon and time trial
  • Textured carbon lever blade for better finger grip
  • Reach adjust (tooled) to suit more hand sizes
  • Stealth-a-majig hose connector for faster initial set-up
  • Bleeding Edge caliper port for quicker, simpler bleeds
  • Two-piston forged aluminium caliper with titanium hardware

Lever

The forged aluminium lever body fits into the end of the bar and is held by an expanding wedge clamp. The carbon blade runs on a bushing pivot, and reach is set with a hex key.

Caliper

The two-piece caliper uses two aluminium pistons, steel-backed organic pads and SRAM DOT 5.1 fluid. SRAM lists it with a 20mm offset Flat Mount bracket and recommends its Paceline rotors.

Compatibility and fit

This is the front brake, for a Flat Mount fork. Check that your bar end suits a wedge-mounted aero lever. The rotor is not included. Hose shortening and bleeding follow SRAM's road hydraulic (HRD) bleed manual, or book it in with our workshop.

This SRAM component is covered by SRAM’s warranty against defects in materials and workmanship; terms are set by SRAM. Wear and service items (chains, cassettes, brake pads, rotors, tape and seals) are normal maintenance parts.

Tune Cycles can supply, fit and set up SRAM components and lodge any warranty assessment on your behalf — book at tunecycles.com.au/book.

  • SRAM Force Aero hydraulic disc brake (DB-FRC-AERO-E1), front
  • Aero lever, 1100mm hose and Flat Mount caliper
  • Textured carbon lever blade, forged aluminium lever body
  • Expanding-wedge bar-end mount; tooled reach adjust
  • Two aluminium pistons, two-piece forged aluminium caliper, titanium hardware
  • Stealth-a-majig hose connector; Bleeding Edge bleed port
  • DOT 5.1 fluid; steel-backed organic pads
  • Black anodised; rotor not included
BrandSRAM
ModelForce Aero Disc Brake (DB-FRC-AERO-E1)
SRAM part number00.5018.277.000
TypeHydraulic disc brake: aero lever, hose and caliper
ApplicationRoad (time trial and triathlon)
PositionFront
Hose length1100mm
Caliper mountFlat Mount, 20mm offset bracket
Pistons2, aluminium
CaliperTwo-piece forged aluminium, titanium hardware
LeverForged aluminium body, carbon (LFRT) blade, bushing pivot
Reach adjustYes, tooled
Contact adjustNo
Hose connectionStealth-a-majig
FluidDOT 5.1
Bleed portBleeding Edge
Pads fittedSteel-backed organic
Recommended rotorSRAM Paceline (not included)
ColourBlack anodised
SKU PSI-SR005018277000
Brand SRAM
Shipping Weight 0.1500kg
Shipping Width 0.160m
Shipping Height 0.060m
Shipping Length 0.220m