To mark 20 years since the original Mono 6Ti, Hope built the EVO V6Ti Mono Edition: its most powerful brake in a black and gold colourway inspired by the original, with a special etch and a unique serial number. Only 1,000 sets were made.

Highlights

• Single-piece CNC-machined radial-mount caliper
• Titanium pistons with Ti-Nitride coating, cross-drilled for cooling
• EVO master cylinder with roller bearing pivot and lid-free bleed port
• Paired with vented T-slot floating rotors with replaceable outer rings
• Limited to 1,000 serial-numbered sets

Heat control for the steepest tracks

A radial mount frees the caliper from post mount size limits, allowing a bigger body, bigger pistons and bigger pads for more power, stiffness and consistency. Titanium pistons, Ti-Nitride coating and cross drilling keep performance steady on long, hot descents in downhill, enduro and e-bike riding.

EVO lever

A bigger lever hook for security, a dimpled blade for grip in all weather, a cam that shortens free stroke without losing modulation, two guide bushes and a roller bearing pivot. Hope does not recommend the Control lever blade with the V6Ti.

Compatibility & fit

Only for post mount forks and frames (PM180, PM200, PM203) with 200mm or 220mm rotors, using one of the dedicated V6Ti brake mounts, which require a rotor 20mm larger than the mount. Only compatible with 2.3mm and 3.3mm (vented) rotors. Check Hope's V6Ti adaptor chart for your frame and fork. Fitting, hose trimming and bleeding are a separate Tune Cycles workshop service, not included in the price – book at tunecycles.com.au/book.