Spank Oozy Trail 395+ DT 240 DEG Handbuilt Trail Boost Wheelset
SKU code: WHL-BUILD-OZY395-240-DEG
Customise Your Purchase
Wheelset
Spank Oozy Trail 395+ MTB 32H Rimset
$339.90
DT Swiss 240 Front Hub 32H J-Bend
$279.30
DT Swiss Competition Black Spoke (Front)
$2.50
DT Swiss 240 DEG Rear Hub 32H J-Bend
$605.15
DT Swiss Competition Black Spoke (Rear)
$2.50
DT Swiss Wheelset Nipple Pack Brass Flat Head Blac
$20.00
Spank Double-Concave Nipple Washers 1.2 mm (65-Pac
$19.95
Upgrades (Optional)
Tubeless Valve Set 50mm
$34.99
Spank Oozy Trail 395+ DT 240 DEG hand-built wheelset
A Spank Oozy Trail 395+ rim set laced 32-spoke front and rear to DT 240 DEG hubs, built by hand in our Marrickville workshop, tensioned, stress-relieved and trued before it leaves the bench. Our Pro wheel build and tubeless tape fitted are included and show as two free lines in your cart.
Before you order — what your bike decides
- Wheel size — 29", 27.5" or mullet; mullet means 29" front and 27.5" rear. Read it off your tyre sidewall.
- Rear axle — Boost 12 × 148 only on this wheelset: measure the inside of the dropouts.
- Front axle — Boost 15 × 110 only on this wheelset: check the fork lowers.
- Rotor mount — 6-bolt only on this wheelset: check your rotors.
- Cassette — the freehub body follows it: Shimano 12-speed MTB is Micro Spline, SRAM Eagle is XD, Shimano 11-speed and older (and CUES LG) is HG. Offered here: Shimano Micro Spline or SRAM XD.
Colour: pick front and rear separately.
Who it is for
For trail and all-mountain riding. For enduro and bike-park use see the EX511 and FR541 kits; on an e-bike, the Spank 359 Hybrid and Pro 5e sets (Spank lists the Oozy for e-bikes too).
The rider's questions
- How much can it carry? Max system weight (rider, bike and gear) 120 kg — the Spank Oozy Trail 395+ rating, the lowest-rated part of the build.
- What tyres fit? 2.3–3.0" tyres are Spank's recommended range for a 35 mm inner width. The tyre's own maximum pressure applies; the rim sets none.
- E-bike? DT approves the DT 240 DEG for e-bikes to 100 Nm of motor torque; above 55 Nm DT recommends the 350 Hybrid and above 100 Nm requires it — see our Hybrid and Pro 5e kits for a full-power motor.
- How fast does the hub engage? 90 points of engagement — Ratchet DEG 90, 4° between clicks.
- Warranty? DT Swiss parts 24 months from purchase; our build work is guaranteed. Any claim comes back to Tune Cycles — see the Warranty tab.
- How long does it take? Built to order from supplier stock — we confirm the build date by email when you order.
- Colours? Hubs in Black, Silver or Red (Limited Edition); the rims are black.
Kit includes
- Spank Oozy Trail 395+ rim set — two 32H rims, 29", 27.5" or mullet
- DT 240 EXP front hub, 32H: 6-bolt · Boost 15 × 110 · colours Black, Silver or Red (Limited Edition)
- 32 × DT Swiss Competition 2.0/1.8/2.0 double-butted black J-bend spokes (front)
- DT 240 DEG rear hub, 32H: 6-bolt · Boost 12 × 148 · freehub Shimano Micro Spline or SRAM XD · colours Black, Silver or Red (Limited Edition)
- 32 × DT Swiss Competition 2.0/1.8/2.0 double-butted black J-bend spokes (rear)
- DT Swiss brass flat-head nipple pack, black (64) — Spank specifies flat-head external nipples; the rims ship without them
- Spank double-concave nipple washers, 65-pack — a washer under every nipple, as Spank's build rules require
Options: rim diameter 29", 27.5" or mullet · freehub Shimano Micro Spline or SRAM XD · hub colour Black, Silver or Red (Limited Edition) · tubeless valves (50 mm, up to 2).
Everything in the Wheelset box is built in. The rows under Upgrades are optional: tick what you want and the price updates. If you want us to lace a rim or hub you already own, that is a workshop job — contact us for a quote.
Sold separately (shown with this kit): tubeless sealant (Muc-Off No Puncture 140 ml), Deg Df Upgrade Kit (No Tool) — the engagement upgrade that fits this hub, SM-RT66 180 mm 6-bolt rotor, a cassette for your freehub body, tyres to suit (sizes above). Rotors: one per wheel, to match your rotor mount and your brake caliper's size range.
How we build it
Every wheel is laced by hand in Marrickville, built to the rim maker's rules (butted spokes, flat-head brass nipples with a washer under each — Spank's Australian distributor requires the washers on this rim — and 3-cross lacing) and brought up to tension evenly (110-120 kgf), stress-relieved and trued, then checked again before it is packed. Tubeless tape (30 mm) is fitted to the rim; add valves and sealant and it is ready for tyres.
Tune Cycles builds and fits these wheels. If you are unsure what your frame, fork or drivetrain takes, ask us before you order.
Spank rims are covered by Spank's manufacturer warranty against defects. DT Swiss hubs are covered for 24 months from purchase against material and manufacturing defects (dtswiss.com/en/support/warranty). Our build — lacing, tension and truing — carries our workmanship guarantee. Any claim comes back to Tune Cycles: bring the wheel to Marrickville or contact us with your order number and we handle it with the brand. Wear, crash damage, corrosion and incorrect fitting are not covered.
- Spank Oozy Trail 395+ rims — 35 mm internal, sleeve-jointed, ASTM 5; 29", 27.5" or mullet
- DT 240 DEG hubs — 90 points of engagement, Ratchet DEG 90; 6-bolt; Boost 15 × 110 or Boost 12 × 148; freehub Shimano Micro Spline or SRAM XD
- Spokes — 32 × DT Competition front, 32 × DT Competition rear; DT brass flat-head nipples (black), Spank washers
- Your bike's fit from the dropdowns: size, freehub, colour — nothing is pre-selected, choose each one
- Hand-laced, tensioned, stress-relieved and trued in Marrickville — Pro wheel build and tubeless tape included (two free lines in your cart)
- Editable kit: the Upgrades rows are optional and the price follows what you tick
| Front | Rear | |
|---|---|---|
| Rim | Spank Oozy Trail 395+ | Spank Oozy Trail 395+ |
| Rim construction | sleeve joint, no eyelets, OohBah inner wall | sleeve joint, no eyelets, OohBah inner wall |
| Diameters offered | 29", 27.5" or mullet | 29", 27.5" or mullet |
| Internal width | 35 mm | 35 mm |
| Rim depth | 22 mm | 22 mm |
| ERD | 27.5" 554 mm, 29" 591 mm | 27.5" 554 mm, 29" 591 mm |
| Spoke holes | 32H | 32H |
| Hub | DT 240 EXP | DT 240 DEG |
| Axle | Boost 15 × 110 | Boost 12 × 148 |
| Rotor mount | 6-bolt | 6-bolt |
| Freehub bodies | — | Shimano Micro Spline or SRAM XD |
| Engagement | — | 90 POE — Ratchet DEG 90 |
| Spokes | 32 × DT Swiss Competition 2.0/1.8/2.0 double-butted black J-bend spokes | 32 × DT Swiss Competition 2.0/1.8/2.0 double-butted black J-bend spokes |
| Nipples | DT brass flat-head nipples (black), Spank washers | DT brass flat-head nipples (black), Spank washers |
| Tape fitted | 30 mm tubeless tape | 30 mm tubeless tape |
| Valves | optional, 50 mm tubeless valves | optional, 50 mm tubeless valves |
| Spoke tension | 110-120 kgf (Spank's general target) | 110-120 kgf (Spank's general target) |
| Max system weight | 120 kg (rider, bike and gear) | 120 kg (rider, bike and gear) |
| Tyre width | 2.3–3.0" recommended | 2.3–3.0" recommended |
| Intended use | Trail — ASTM 5 | Trail — ASTM 5 |
| E-bike rating | DT: approved to 100 Nm motor torque (Hybrid recommended above 55 Nm) | DT: approved to 100 Nm motor torque (Hybrid recommended above 55 Nm) |
| Warranty | DT Swiss parts 24 months from purchase | DT Swiss parts 24 months from purchase |
| Built by | Tune Cycles, Marrickville — Pro wheel build and tubeless tape included | Tune Cycles, Marrickville — Pro wheel build and tubeless tape included |
| SKU | WHL-BUILD-OZY395-240-DEG |
| Brand | Spank |