Super Stong. Bullet Proof & Great Value

DT Swiss FR541 Rim

The FR 541 may not be your first rim, but it aspires to be the last. The new rim shape improves the impact resistance, enabling you to push a little harder on the trails. It also enhances the pinch flat protection for a trusty ride on rougher tracks. Build this rim with care and it will reward you with resistance and lightness for a long-lasting bond.

Hope Pro 4 Boost 32H Hubset

With a time tested reputation for bullet proof quality and reliability, Hope brings the advantages of Boost to their benchmark disc compatible rear hub. The 6mm wider rear Boost standard means the bracing angles of the spokes in wheelbuild are improved, so that complete wheel stiffness, efficiency and strength is increased significantly.

Competition Spokes

This is one of the most versatile spokes in the DT Swiss spoke range. DT Competition gets its special strength from cold forging. This makes it not only extremely durable but thanks to the thinner middle section, it is 48 g lighter than a spoke with a constant diameter of 1.8 mm. The balanced relation between strength and weight of its 2.0 mm counterpart allows for a wide range of uses, from road wheels to super-light Enduro MTB wheels. Weight: from 311 g for 64 spokes at a length of 264 mm.

Squorx Prolock Nipples

Pro Lock is a process where a dual compound, adhesive liquid is injected into the nipple thread, allowing for extremely durable wheel builds. By threading the nipple onto the spoke the adhesive is activated and starts to harden. Re-truing the wheel is still possible after the adhesive has hardened completely, with only a minimal decrease of its thread-lock function.

DT Swiss FR541 Rim

    Tests conducted with a leading tire supplier showed a 17% increase in pinch flat resistance compared to the previous FR 560 rim.
    Ride in full 29", full 27,5" or mullet. The FR 541 is available in both sizes and both sizes are available in 28 or 32 spoke count.
    The welding process on aluminum rims is the most resistant joining method of the DT Swiss aluminum portfolio.
    The PHR system increases the load-bearing surface of the nipples on the rim and reduces localized stresses.
    The FR 541 comes with three additional stickers to match your style.

Hope Pro 4 Boost 32H Hubset

  • Designed specifically to suit a frame with a Boost 148x12mm rear end
  • Hub flanges move outboard 3mm compared to standard Pro 4 rear hub to increase complete wheel stiffness
  • 4 Pawl Ratchet with 44 tooth engagement (8.2 deg) • Sealed Stainless Steel cartridge bearings
  • Machined from forged 2014 T6 aluminium billet
  • Boost 148mm hub width designed to take a 12mm thru axle
  • Standard 6 bolt disc fitting
  • Larger spoke flange to enable stiffer wheel builds
  • Unsurpassed reliability
  • 32 Hole
  • Suits: SRAM 11/12sp (XD Driver)
  • Freehub material: Aluminium
  • Weight: 311g


2x DT Swiss FR541 Rim (29", 27.5" or Mullet)

64x Champion Spokes

1x Hope Pro 4 ISO 6-Bolt 110x15 Front Hub

1x Hope Pro 4 ISO 6-Bolt 148x12 Rear Hub

1x Tubeless Rim Tape

Brand DT Swiss

Be The First To Review This Product!

Help other Tune Cycles users shop smarter by writing reviews for products you have purchased.

Write a product review