Complete Wheelkit ready for Summer shuttles! 

  • DT Swiss FR541 Rims on DT 350 6-Bolt Boost Hubs

  • Tubeless Valves (2) & Rim Tape

  • Maxxis Assegai 2.5" EXO+ Tyre on Front (29" or 27.5")

  • Maxxis Dissector 2.4" EXO+ Tyre on Rear (29" or 27.5")

  • Muc Off Sealant (300ml)

Available in 29", 27.5" and Mullet/MX Combos for Microspline & XD.

DT Swiss FR541 Rim

The FR 541 may not be your first rim, but it aspires to be the last. The new rim shape improves the impact resistance, enabling you to push a little harder on the trails. It also enhances the pinch flat protection for a trusty ride on rougher tracks. Build this rim with care and it will reward you with resistance and lightness for a long-lasting bond.

DT Swiss 350 Boost MTB 32H Hubset

With DT Swiss’ new 350, reliability has never been more important. This new state of the arch Swiss technology fits perfectly in the centrelock rotor to make sure it remains safe and intact. Its 32 holes with a 6-bolt Disc relies on the strong materials used to create it. Although a small part its clever details reinforce the transfer of the highest of loads and make it more aerodynamic, so you don’t need to worry about bulk. Able to withstand the tension of the strongest pedaling power, the 350 gives athletes reliable direct power transmission.

Competition Spokes

This is one of the most versatile spokes in the DT Swiss spoke range. DT Competition gets its special strength from cold forging. This makes it not only extremely durable but thanks to the thinner middle section, it is 48 g lighter than a spoke with a constant diameter of 1.8 mm. The balanced relation between strength and weight of its 2.0 mm counterpart allows for a wide range of uses, from road wheels to super-light Enduro MTB wheels. Weight: from 311 g for 64 spokes at a length of 264 mm.

Squorx Prolock Nipples

Pro Lock is a process where a dual compound, adhesive liquid is injected into the nipple thread, allowing for extremely durable wheel builds. By threading the nipple onto the spoke the adhesive is activated and starts to harden. Re-truing the wheel is still possible after the adhesive has hardened completely, with only a minimal decrease of its thread-lock function.

DT Swiss FR541 Rim

  • IMPROVED PINCHFLAT PROTECTION
    Tests conducted with a leading tire supplier showed a 17% increase in pinch flat resistance compared to the previous FR 560 rim.
  • AVAILABLE IN 29" AND 650B WITH 28 OR 32 SPOKE COUNT
    Ride in full 29", full 27,5" or mullet. The FR 541 is available in both sizes and both sizes are available in 28 or 32 spoke count.
  • WELDED RIM
    The welding process on aluminum rims is the most resistant joining method of the DT Swiss aluminum portfolio.
  • INCREASE RESISTANCE WITH PHR SYSTEM
    The PHR system increases the load-bearing surface of the nipples on the rim and reduces localized stresses.
  • PERSONALIZE YOUR RIDE
    The FR 541 comes with three additional stickers to match your style.

DT Swiss 350 Boost 32H Hubset

  • 32 Hole
  • 6-bolt
  • MTB recommended
  • 12mm Thru Axle
  • 157mm Boost
  • Material Aluminum
  • 277g
  • 36 SL Ratchet System

 

2x DT Swiss FR541 Rim (29", 27.5" or Mullet)

64x Champion Spokes

1x DT Swiss 350 110x15 Front Hub

1x DT Swiss 350 148x12 Rear Hub

1x Tubeless Rim Tape

SKU WHL-BUILD-FR541-350-PROMO
Brand DT Swiss

Be The First To Review This Product!

Help other Tune Cycles users shop smarter by writing reviews for products you have purchased.

Write a product review