DT Swiss EX471 Chris King R45D Handbuilt Gravel Disc 32H Wheelset
SKU code: WHL-BUILD-EX471-R45D-32H
Customise Your Purchase
Wheelset
DT Rim EX471 Enduro MTB 32H Rimset
$436.06
Chris King R45D Centrelock Front Hub 32H 12/100
$500.00
DT Swiss Competition Black Spoke (Front)
$2.50
Chris King R45D Centrelock Rear Hub 32H 12x142
$925.00
DT Swiss Competition Black Spoke (Rear)
$2.50
Upgrades (Optional)
Tubeless Valve Set 50mm
$34.99
DT Swiss EX471 Chris King R45D hand-built wheelset
A DT Swiss EX471 rim set laced 32-spoke front and rear to Chris King R45D hubs, built by hand in our Marrickville workshop, tensioned, stress-relieved and trued before it leaves the bench. Our Pro wheel build and tubeless tape fitted are included and show as two free lines in your cart.
Before you order — what your bike decides
- Wheel size — 29", 27.5" or mullet: read it off your tyre sidewall (700 × 40C is 700c; 27.5 × 2.1 is 650b).
- Rear axle — 12 × 142 only on this wheelset: measure the inside of the dropouts.
- Front axle — 12 × 100 only on this wheelset: check the fork lowers.
- Rotor mount — Centre Lock only on this wheelset: check your rotors.
- Cassette — Shimano HG freehub body: Shimano 11- and 12-speed road / GRX and SRAM 11-speed cassettes fit HG; SRAM 12-speed road and XPLR need XDR — not offered on this listing, ask us about the body swap.
Colour: pick front and rear separately.
Who it is for
For gravel and all-road riding on a disc-brake bike. Not for a Boost mountain bike: the hubs are 12 × 100 front and 12 × 142 rear. For a lighter gravel wheel ask about the GR531.
The rider's questions
- How much can it carry? Max system weight (rider, bike and gear) 130 kg — the DT Swiss EX471 rating, the lowest-rated part of the build.
- What tyres fit? 32–50 mm tyres are DT's recommended range for a 25 mm inner width; 29–30 mm and 52–69 mm are possible; the tyre's own maximum pressure applies, the rim sets none.
- How fast does the hub engage? 45 points of engagement — Chris King RingDrive (45 points), 8° between clicks.
- Warranty? DT Swiss parts 24 months from purchase; Chris King hubs under the King Lifetime Warranty for the original owner; our build work is guaranteed. Any claim comes back to Tune Cycles — see the Warranty tab.
- How long does it take? Allow 4–8 weeks. The Chris King hubs come in from the importer and every wheelset is built to order — we confirm the build date by email when you order.
- Colours? Hubs in Black, Silver, Matte Turquoise or Red; the rims are black.
Kit includes
- DT Swiss EX471 rim set — two 32H rims, 29", 27.5" or mullet
- Chris King R45D front hub, 32H: Centre Lock · 12 × 100 · colours Black, Silver, Matte Turquoise or Red
- 32 × DT Swiss Competition 2.0/1.8/2.0 double-butted black J-bend spokes (front)
- Chris King R45D rear hub, 32H: Centre Lock · 12 × 142 · freehub Shimano HG · colours Black, Silver or Matte Turquoise
- 32 × DT Swiss Competition 2.0/1.8/2.0 double-butted black J-bend spokes (rear)
- The DT Pro Lock Squorx nipples supplied with the rims, as fitted
Options: rim diameter 29", 27.5" or mullet · hub colour Black, Silver, Matte Turquoise or Red · tubeless valves (50 mm, up to 2).
Everything in the Wheelset box is built in. The rows under Upgrades are optional: tick what you want and the price updates. If you want us to lace a rim or hub you already own, that is a workshop job — contact us for a quote.
Sold separately (shown with this kit): tubeless sealant (Muc-Off No Puncture 140 ml), RT-CL700 160 mm Centre Lock rotor, the Shimano SM-RTAD05 adapter (runs a 6-bolt rotor on a Centre Lock hub; not with SM-RT86 / RT76 aluminium-carrier rotors), a cassette for your freehub body, tyres to suit (sizes above). Rotors: one per wheel, to match your rotor mount and your brake caliper's size range.
How we build it
Every wheel is laced by hand in Marrickville, brought up to tension evenly to the lower of the rim and hub limits (1200 N), stress-relieved and trued, then checked again before it is packed. Tubeless tape (27 mm) is fitted to the rim; add valves and sealant and it is ready for tyres.
Tune Cycles builds and fits these wheels. If you are unsure what your frame, fork or drivetrain takes, ask us before you order.
DT Swiss rims are covered for 24 months from purchase against material and manufacturing defects (dtswiss.com/en/support/warranty); riding outside the rim's ASTM category voids it. Chris King hubs, bearings included, carry the King Lifetime Warranty against manufacturing defects for the original purchaser (chrisking.com/pages/king-lifetime-warranty). Our build — lacing, tension and truing — carries our workmanship guarantee. Any claim comes back to Tune Cycles: bring the wheel to Marrickville or contact us with your order number and we handle it with the brand. Wear, crash damage, corrosion and incorrect fitting are not covered.
- DT Swiss EX471 rims — 25 mm internal, welded, PHR spoke bed, ASTM 4; 29", 27.5" or mullet
- Chris King R45D hubs — 45 points of engagement, Chris King RingDrive (45 points); Centre Lock; 12 × 100 or 12 × 142; freehub Shimano HG
- Spokes — 32 × DT Competition front, 32 × DT Competition rear; the DT Pro Lock Squorx nipples supplied with the rims
- Your bike's fit from the dropdowns: size, colour — nothing is pre-selected, choose each one
- Hand-laced, tensioned, stress-relieved and trued in Marrickville — Pro wheel build and tubeless tape included (two free lines in your cart)
- Editable kit: the Upgrades rows are optional and the price follows what you tick
- Lead time 4–8 weeks — built to order
| Front | Rear | |
|---|---|---|
| Rim | DT Swiss EX471 | DT Swiss EX471 |
| Rim construction | welded, PHR spoke bed | welded, PHR spoke bed |
| Diameters offered | 29", 27.5" or mullet | 29", 27.5" or mullet |
| Internal width | 25 mm | 25 mm |
| Rim depth | 21 mm | 21 mm |
| ERD | 26 537 mm, 27.5" 562 mm, 29" 600 mm | 26 537 mm, 27.5" 562 mm, 29" 600 mm |
| Spoke holes | 32H | 32H |
| Hub | Chris King R45D | Chris King R45D |
| Axle | 12 × 100 | 12 × 142 |
| Rotor mount | Centre Lock | Centre Lock |
| Freehub bodies | — | Shimano HG |
| Engagement | — | 45 POE — Chris King RingDrive (45 points) |
| Spokes | 32 × DT Swiss Competition 2.0/1.8/2.0 double-butted black J-bend spokes | 32 × DT Swiss Competition 2.0/1.8/2.0 double-butted black J-bend spokes |
| Nipples | The DT Pro Lock Squorx nipples supplied with the rims | The DT Pro Lock Squorx nipples supplied with the rims |
| Tape fitted | 27 mm tubeless tape | 27 mm tubeless tape |
| Valves | optional, 50 mm tubeless valves | optional, 50 mm tubeless valves |
| Max spoke tension | 1200 N | 1200 N |
| Max system weight | 130 kg (rider, bike and gear) | 130 kg (rider, bike and gear) |
| Tyre width | 32–50 mm recommended (29–30, 52–69 mm possible) | 32–50 mm recommended (29–30, 52–69 mm possible) |
| Intended use | Gravel — ASTM 4 | Gravel — ASTM 4 |
| Warranty | DT Swiss parts 24 months from purchase; Chris King hubs under the King Lifetime Warranty for the original owner | DT Swiss parts 24 months from purchase; Chris King hubs under the King Lifetime Warranty for the original owner |
| Built by | Tune Cycles, Marrickville — Pro wheel build and tubeless tape included | Tune Cycles, Marrickville — Pro wheel build and tubeless tape included |
| SKU | WHL-BUILD-EX471-R45D-32H |
| Brand | DT Swiss |