Unior backs this tool with its Lifetime Warranty against defects in materials and workmanship: if it ever fails through a manufacturing defect it is repaired or replaced free of charge. Normal wear, misuse and modification are not covered. For warranty support, return the tool to Tune Cycles with your proof of purchase and we'll manage the claim with Unior's Australian distributor on your behalf. This warranty is in addition to your rights under the Australian Consumer Law.

• Unior model 1669/4 (article 616758)
• Material: Premium flex plus carbon steel surface finish: blacken to standard din 50938 the wrench is the basic working tool for cyclists extended tours. how to use the tool: to change broken spokes on the right side of the rear wheel, the cassette has to be removed first. firstly remove the rear wheel, than fit the tool onto the freewheel nut. replace the rear wheel, so that the square edge of the tool presses to the frame or derailleur hanger. after that, push the pedals in the forward direction and loosen the freewheel nut. remove the cassette and replace the broken spoke. in order to prevent the possibility that the paint on the bicycle frame is damaged, a protective plastic plate should be inserted between the key and the frame
• Length: 47 mm
• Width: 32 mm
• Diameter (1): 19.5 mm
• Diameter (2): 23.6 mm
• Thickness (1): 3.4 mm
• Thickness (2): 1.8 mm
• Made by Unior, Slovenia — professional bicycle tools since 1919