This SRAM adaptor lets you fit a braze-on front derailleur to a frame without a braze-on tab by clamping to a 31.8mm seat tube. It includes a Chainspotter stop; SRAM describes its chain spotters as protecting the frame and adjusting independently of the derailleur.

Highlights

  • Genuine SRAM front derailleur clamp adaptor
  • Clamps to a 31.8mm seat tube
  • Chainspotter stop included
  • Standard spacing
  • Black

Compatibility and fit

SRAM lists its clamp adaptors as compatible with its AXS, RED eTap, RED 22, RED, Force 22, Force, Rival 22, Rival and Apex braze-on front derailleurs, and this one appears among the spares for the RED eTap front derailleur. Check that your seat tube is 31.8mm; SRAM lists a 34.9mm version, and a wide spacing version for its 47.5mm chainline set-ups. Derailleur height and angle must be reset to SRAM's specification after fitting, so a workshop fit is a good idea.

This SRAM component is covered by SRAM’s warranty against defects in materials and workmanship; terms are set by SRAM. Wear and service items (chains, cassettes, brake pads, rotors, tape and seals) are normal maintenance parts.

Tune Cycles can supply, fit and set up SRAM components and lodge any warranty assessment on your behalf — book at tunecycles.com.au/book.

  • Genuine SRAM braze-on front derailleur adaptor
  • 31.8mm seat tube clamp
  • Chainspotter stop
  • Standard spacing
  • Black
  • SRAM part number 11.7618.000.001
BrandSRAM
Part typeFront derailleur braze-on (clamp) adaptor
Clamp diameter31.8mm
SpacingStandard
Chainspotter stopYes
ColourBlack
SRAM part number11.7618.000.001
SKU PSI-SR117618000001
Brand SRAM

Related products

More From This Category