A DUB press-fit bottom bracket for frames with an 83mm PF30 shell, the wide shell used on many downhill bikes. It suits SRAM’s DUB MTB Wide cranksets.

Highlights

  • For PF30 shells, 83mm wide
  • DUB spindle interface, MTB Wide
  • Aluminium press-fit cups
  • Sealed cartridge bearings
  • Spacers included (3.0mm and 7.5mm per the distributor)

One spindle size

DUB uses one oversized spindle across bottom bracket standards, so crank choice is simpler and sealing is better.

Compatibility and fit

For 83mm PF30 frames with DUB MTB Wide cranks; SRAM lists it at 52mm and 55mm chainlines. Press-fit bottom brackets need a bearing press and the SRAM service manual, so we recommend workshop fitting.

This SRAM component is covered by SRAM’s warranty against defects in materials and workmanship; terms are set by SRAM. Wear and service items (chains, cassettes, brake pads, rotors, tape and seals) are normal maintenance parts.

Tune Cycles can supply, fit and set up SRAM components and lodge any warranty assessment on your behalf — book at tunecycles.com.au/book.

  • DUB PressFit 30, 83mm shell
  • MTB Wide
  • Aluminium cups
  • Standard sealed bearings
  • 52 or 55mm chainline cranks
  • Spacers included
BrandSRAM
ModelDUB PressFit30 Bottom Bracket (BB-DUB-PF30-A1)
SRAM part number00.6418.028.006
ShellPF30, 83mm
Spindle interfaceDUB
Crank typeMTB Wide
Chainline52mm, 55mm
Cup materialAluminium
BearingsStandard (steel)
Spacers3.0mm and 7.5mm (per PSI)
SKU PSI-SR006418028006
Brand SRAM
Shipping Weight 0.2200kg
Shipping Width 0.160m
Shipping Height 0.060m
Shipping Length 0.220m