Hope's EVO V6Ti is its most powerful brake, and the Mono Edition marks 20 years since the original Mono 6Ti. Hope is making 1,000 sets, each in a black and gold finish with a special etch and its own serial number.

Highlights

  • Front and rear set, 220mm discs front and rear, braided hose
  • Single-piece CNC-machined radial-mount caliper
  • Titanium pistons, Ti-Nitride coated and cross-drilled for cooling
  • Larger pads and caliper for power, stiffness and heat management
  • EVO lever with roller-bearing pivot, lid-free bleed port and revised cam
  • Limited to 1,000 numbered sets

Built for the biggest days

Hope designed the V6Ti for downhill, enduro and e-bike riding. Moving to a radial mount frees the caliper from post-mount limits, so there's room for more piston area, bigger pads and a stiffer body that sheds heat better. The lever has a deeper hook and a dimpled blade for grip in all weather.

Compatibility & fit

Hope states the V6Ti fits only with one of its dedicated V6Ti brake mounts, needs a disc 20mm larger than the frame or fork's post-mount size, and suits post-mount forks and frames (PM180, PM200, PM203) with 200 or 220mm discs, 2.3mm or 3.3mm vented. Check the Hope V6Ti adaptor chart, or ask us and we'll confirm the mount your bike needs. Fitting and bleeding are separate Tune Cycles workshop services – book a workshop visit.

Hope Technology covers its components for two years from the original date of purchase against manufacturer defects in material and workmanship. Proof of purchase is required, and damage caused by misuse or by not following Hope's instructions is not covered. For warranty support, return the item to Tune Cycles with your proof of purchase and we'll manage the claim for you. This is in addition to your rights under the Australian Consumer Law.
  • Limited Mono Edition, numbered
  • 220mm discs front and rear
  • Six titanium pistons per caliper
  • Radial-mount caliper
  • Braided hose
  • Roller-bearing lever pivot
  • Lid-free bleed port
ModelEVO V6Ti Mono Edition
SetFront and rear
Discs220mm front, 220mm rear
HoseBraided
CaliperSix-piston, single-piece CNC machined, radial mount
PistonsTitanium, Ti-Nitride coated, cross-drilled
MountingHope V6Ti dedicated mount required; post-mount PM180 / PM200 / PM203
Disc compatibility200 or 220mm, 2.3mm or 3.3mm vented
FinishBlack and gold, special etch, numbered
EditionLimited to 1,000 sets
Hope part numberT4EV6T2222BME
SKU BSP-HOPBSEVOV6TISET220
Brand Hope
Shipping Weight 2.5000kg
Shipping Width 0.350m
Shipping Height 0.120m
Shipping Length 0.450m