Pull bearings out of blind holes, where there is no way to push them from behind, with a puller built for professional mechanics. Enduro's Pro set adds a slide hammer that converts into a workshop mallet.

Highlights

• Heat-treated CrMo collets for bearings with an inside diameter of 8–32mm
• Stainless steel slide hammer shaft that doubles as a mallet handle
• Stainless mallet head with two screw-in replaceable faces: brass and polyurethane
• Back of the mallet is machined to hold a cassette lock-ring tool magnetically
• Collets attach on a BSW 1/2in-12 thread

Built for the workshop

A major upgrade to Enduro's standard blind hole puller, this set is designed and made with professional mechanics in mind. The heat-treated CrMo collets fit bearings with an 8–32mm inside diameter, and the stainless slide hammer pulls them out of blind holes. The same shaft doubles as the handle for the stainless mallet, and with a cassette lock-ring tool held magnetically in the back of the mallet, it serves as a lock-ring tool too.

Ceramic bearings and workshop service

Enduro advises against using a blind hole puller to remove its XD-15 ceramic-hybrid bearings; press those out with a linear press and the hub axle instead. Our Marrickville workshop replaces hub and pivot bearings as a separate service.

Compatibility & fit

• Bearing inside diameters: 8–32mm
• Collet thread: British Standard Whitworth (BSW) 1/2in-12, major diameter 12.7mm, 12 threads per inch, pitch 2.117mm
• Not recommended by Enduro for removing XD-15 ceramic-hybrid bearings