The Zyklop Mini 1 bit ratchet with a full Bit-Check 30 of bits, a socket adaptor and a quick-change holder. A complete small-fastener kit that fits in a pocket or on a belt.

Highlights

  • 8001 A Zyklop Mini 1 bit ratchet: 60 teeth, 6° return, thumbwheel, over 65 Nm
  • 870/1 adaptor for 1/4" sockets
  • 889/4/1 K Rapidaptor holder for drills and drivers
  • 28 bits, 25 mm: PH 1–3, PZ 1–3, TX 10–40, TX BO 10–30, hex 3–8 mm, slotted 5.5 mm
  • Bit-Check with belt clip

Zyklop Mini ratchet

The 8001 A Zyklop Mini 1 bit ratchet is drop-forged full steel and takes 1/4" hex bits directly. Its 60-tooth mechanism needs only a 6° swing, the thumbwheel spins screws where there's no room to ratchet, and a simple switch changes direction. Wera rates it to over 65 Nm.

What's in the set

8001 A bit ratchet 1/4" x 87 mm; 870/1 adaptor 1/4" x 25 mm; 889/4/1 K Rapidaptor holder; 851/1 TZ PH 1 (x2), PH 2 (x3), PH 3; 855/1 TH PZ 1, PZ 2 (x3), PZ 3; 867/1 TZ TORX TX 10, 15, 20, 25, 30, 40; 867/1 Z TORX BO TX 10, 15, 20, 25, 30; 800/1 TZ slotted 1 x 5.5 mm; 840/1 Z hex 3, 4, 5, 6, 8 mm.

Compatibility & fit

1/4" hex bits. The 870/1 adaptor lets the ratchet drive 1/4" square sockets (Wera: with friction ball, for manual nut-spinner sockets). TORX BO bits have a bore hole for TORX screws with a centre pin.

Wera warrants its tools against defects in materials and workmanship. Bits and bit holders are wear items, so wear from normal use, misuse or modification is not a defect. This sits alongside your rights under the Australian Consumer Law.

For warranty support, return the product to Tune Cycles and we'll manage the claim with Wera's Australian distributor.

  • 8001 A Zyklop Mini 1 bit ratchet: 60 teeth, 6° return, thumbwheel, over 65 Nm
  • 870/1 adaptor for 1/4" sockets
  • 889/4/1 K Rapidaptor holder for drills and drivers
  • 28 bits, 25 mm: PH 1–3, PZ 1–3, TX 10–40, TX BO 10–30, hex 3–8 mm, slotted 5.5 mm
  • Bit-Check with belt clip
Pieces31
Ratchet8001 A Zyklop Mini 1, 1/4" hex, 87 mm, 60 teeth, 6°
Adaptor870/1, 1/4" hex to 1/4" square
Holder889/4/1 K Rapidaptor
Bits (25 mm)PH 1 x2, 2 x3, 3; PZ 1, 2 x3, 3; TX 10–40; TX BO 10–30; hex 3–8 mm; slotted 5.5 mm
Wera article no.05073640001
SKU FES-W-05073640001
Brand Wera
Shipping Weight 0.4000kg
Shipping Width 0.200m
Shipping Height 0.080m
Shipping Length 0.300m

More From This Category