Wahoo SPEEDPLAY POWER Single-Sided Power Meter Pedals
SKU code: FES-WFPRX2L55
Sold Out
SPEEDPLAY POWER Single is the more affordable way to train with power on SPEEDPLAY pedals. A sensor in the left pedal measures your power and cadence, and the right pedal is a matching non-powered pedal on the same spindle.
Highlights
- Left-pedal power meter: power and cadence
- ±1% accuracy with temperature compensation
- ANT+ and Bluetooth: up to three Bluetooth connections at once
- Rechargeable, up to 75 hours per charge
- Full SPEEDPLAY adjustability with dual-sided entry
How single-sided power works
The left sensor measures your left leg and doubles it to give total power. That is accurate for pacing and training zones for most riders, but it can't show left/right balance. If balance data matters to you, for injury rehab or leg-strength differences, choose SPEEDPLAY POWER Dual.
Accuracy and battery
Wahoo rates the pedal to ±1%, with temperature compensation and cadence from an internal gyroscope. The rechargeable battery lasts up to 75 hours and takes about 1.5 hours to charge from a standard 5V USB charger.
Compatibility & fit
Compatible with 3-hole road shoes and Speedplay-specific 4-hole shoes. With some shoes the sole can touch the power pod as the pedal turns, so check clearance before riding: a 2.5 mm cleat spacer is included for shoes that need it. Washers are included to keep at least 1 mm between the pod and the crank arm. Works with oval chainrings. Road and trainer use only.
Pairs with Wahoo ELEMNT computers and KICKR trainers, and with most ANT+ or Bluetooth bike computers, watches and training apps such as Zwift and TrainerRoad. Set-up, calibration and firmware updates run through the Wahoo app.
In the box: left power pedal, right pedal (non-powered), Standard Tension cleats and cleat assembly, washers (x2), cleat spacer, screw packet, charging cable and clip, quick start guide. Installation needs #1 and #2 Phillips screwdrivers and an 8mm hex key.
Want it set up properly? Tune Cycles can fit the pedals and mount and adjust your cleats as a separate workshop service, booked with our Melbourne workshop.
Wahoo warrants this product against defects in materials and workmanship for one year from the original date of purchase, for the original purchaser under normal use. Warranty claims are handled in the country of purchase. This sits alongside your rights under the Australian Consumer Law.
Do not open or disassemble the pedals, and do not ride if your shoe touches the power pod: Wahoo states that either voids the warranty.
For warranty support, return the product to Tune Cycles and we'll manage the claim with Wahoo's Australian distributor.
- Left-pedal power meter: power and cadence
- ±1% accuracy with temperature compensation
- ANT+ and Bluetooth: up to three Bluetooth connections at once
- Rechargeable, up to 75 hours per charge
- Full SPEEDPLAY adjustability with dual-sided entry
- Works with oval chainrings
- Cleat spacer and crank washers included for shoe and crank clearance
- Pairs with ELEMNT, KICKR, Zwift, TrainerRoad and most ANT+ or Bluetooth devices
| Measures | Power (left leg, doubled) and cadence |
|---|---|
| Weight | 249 g per pair |
| Spindle length (Q-factor) | 55 mm |
| Spindle material | Stainless steel |
| Body material | Grivory |
| Stack height | 13 mm (3-hole) |
| Bearings | Triple-sealed cartridge and needle bearings |
| Power accuracy | ±1% |
| Connectivity | ANT+ and Bluetooth (up to 3 Bluetooth connections at once, unlimited ANT+) |
| Battery | Rechargeable, up to 75 hours; about 1.5 hours for a full charge |
| Float | Adjustable from 0° to 15° |
| Release angle | Micro-adjustable from 0° to 7.5° |
| Cleat fore-aft adjustment | Up to 13 mm |
| Cornering clearance | 39° |
| Max rider weight | 113 kg (250 lb) |
| Cleats included | Standard Tension walkable (Easy Tension compatible) |
| SKU | FES-WFPRX2L55 |
| Model # | FES-WFPRX2L55 |
| Barcode # | FES-WFPRX2L55 |
| Brand | Wahoo |
