Maven is SRAM's high-power mountain bike brake, and Ultimate is the top finish in the range. This B1 version pairs the Stealth lever, with its carbon blade, with a clear anodised four-piston caliper on titanium hardware, set up as a rear brake on a 2000mm hose.

Highlights

  • Four 18mm pistons in a stiff two-piece forged aluminium caliper
  • Redesigned SwingLink lever for smooth power delivery and lighter engagement
  • Tool-free reach adjust and Contact Point Adjust
  • Carbon lever blade on a bearing pivot, titanium caliper hardware
  • Stealth lever architecture with MatchMaker X clamp included
  • Mineral oil system with a Bleeding Edge caliper port

Power you can tune

SRAM built Maven for gravity, eMTB, enduro and trail bikes. The caliper is designed to manage heat so power stays consistent to the bottom of a long descent, and the extra headroom lets you tune feel with pad compound and rotor size.

Fluid and bleeding

SRAM designed Maven for Maxima mineral oil only and warns other fluids can permanently damage the seals. Bleeding needs SRAM's mineral oil bleed kit with the green Bleeding Edge fitting.

Compatibility and fit

The caliper is post mount. Where a 20mm adapter is needed for a bigger rotor, Maven needs SRAM's 20P-1 (180mm) or 20P-2 (200 and 220mm) bracket; the older 20P bracket won't fit. SRAM recommends its HS2 rotors. The MMX clamp takes SRAM MMX-compatible shifters. Hose shortening and bleeding need the right tools and SRAM's manual, or book it in with our workshop.

This SRAM component is covered by SRAM’s warranty against defects in materials and workmanship; terms are set by SRAM. Wear and service items (chains, cassettes, brake pads, rotors, tape and seals) are normal maintenance parts.

Tune Cycles can supply, fit and set up SRAM components and lodge any warranty assessment on your behalf — book at tunecycles.com.au/book.

  • SRAM Maven Ultimate B1 hydraulic disc brake (DB-MVN-ULT-B1), rear
  • Lever, 2000mm hose and four-piston caliper
  • Four 18mm phenolic pistons, two-piece forged aluminium caliper
  • Titanium caliper hardware, clear anodised finish
  • Carbon lever blade, forged aluminium lever body, bearing pivot
  • Tool-free reach adjust and Contact Point Adjust
  • Steel-backed organic pads fitted; Bleeding Edge bleed port
  • MatchMaker X clamp included
BrandSRAM
ModelMaven Ultimate B1 (DB-MVN-ULT-B1)
SRAM part number00.5018.259.001
TypeHydraulic disc brake: lever, hose and caliper
ApplicationMountain bike
PositionRear
Hose length2000mm
Pistons4 x 18mm, phenolic
CaliperTwo-piece forged aluminium, titanium hardware
Caliper mountPost mount
LeverStealth lever, forged aluminium body, carbon blade, bearing pivot
AdjustmentTool-free reach adjust, Contact Point Adjust
Pads fittedSteel-backed organic
FluidSRAM Maxima mineral oil
Bleed portBleeding Edge
ClampMatchMaker X (included)
Recommended rotorSRAM HS2
ColourClear anodised
SKU PSI-SR005018259001
Brand SRAM
Shipping Weight 0.1500kg
Shipping Width 0.160m
Shipping Height 0.060m
Shipping Length 0.220m