The X0 Eagle eMTB crank arm assembly brings Eagle Transmission durability to pedal-assist bikes. The aluminium arms are built to handle eMTB loads, and this is the 150mm length in black.

Highlights

  • Aluminium crank arms, black
  • 150mm length
  • ISIS spindle interface for compatible eMTB motors
  • Self-extracting crank bolt
  • Fits listed Bosch and Avinox drive units, 39mm crankset offset

Built for pedal assist

SRAM optimises the X0 eMTB crank for a balance of stiffness and weight in an all-aluminium design. Shorter arms like this one add pedal clearance on rough, technical trails and keep the pedal stroke compact.

Compatibility and fit

SRAM lists these arms for Avinox M1 and M2S, and Bosch BDU31 (SX), BDU37 (CX Gen4) and BDU38 (CX Gen5) drive units. The crank cap (gap cap), chainring and bottom bracket are not included. Check your motor and chainring before ordering; fitting needs the correct tools and torque specs, or a workshop.

This SRAM component is covered by SRAM’s warranty against defects in materials and workmanship; terms are set by SRAM. Wear and service items (chains, cassettes, brake pads, rotors, tape and seals) are normal maintenance parts.

Tune Cycles can supply, fit and set up SRAM components and lodge any warranty assessment on your behalf — book at tunecycles.com.au/book.

  • SRAM X0 Eagle eMTB crank assembly (FC-X0-PA-D1)
  • 150mm aluminium arms, black
  • ISIS spindle interface
  • Self-extracting bolt
  • 39mm crankset offset
  • Avinox M1/M2S and Bosch BDU31/37/38 listed
  • Crank cap, chainring and BB not included
BrandSRAM
Model/seriesX0 Eagle eMTB (FC-X0-PA-D1)
SRAM part number00.6118.662.004
Crank arm length150mm
Crank arm materialAluminium
ColourBlack
Spindle interfaceISIS
Crankset offset39mm
Drive unitsAvinox M1, M2S; Bosch BDU31 (SX), BDU37 (CX Gen4), BDU38 (CX Gen5)
Crank boltSelf-extracting
Not includedCrank cap, chainring, bottom bracket
SKU PSI-SR006118662004
Brand SRAM
Shipping Weight 0.4000kg
Shipping Width 0.250m
Shipping Height 0.100m
Shipping Length 0.400m