A 40-tooth X-SYNC single chainring in black, the replacement or upgrade ring for SRAM's Rival AXS E1 1x road cranks. It bolts straight to the 8-bolt direct-mount interface and gives a lower 1x road or gravel gear.

Highlights

  • X-SYNC wide-tooth, narrow-tooth profile holds the chain without a front derailleur
  • 8-bolt direct mount with a 6.5mm offset
  • Aluminium with a laser-etched finish
  • SRAM lists it for 12 and 13-speed drivetrains
  • 8 chainring bolts included

Swapping ring sizes

Direct-mount rings let you change gearing without changing the crank. SRAM makes this black ring from 38T to 46T.

Compatibility and fit

SRAM lists these rings with the Rival AXS E1 cranksets and their 8-bolt direct-mount interface. They're 1x rings for SRAM Road Flattop chains (SRAM also lists Eagle and T-Type chain compatibility). Torx tools and the correct bolt torque are needed for fitting.

This SRAM component is covered by SRAM’s warranty against defects in materials and workmanship; terms are set by SRAM. Wear and service items (chains, cassettes, brake pads, rotors, tape and seals) are normal maintenance parts.

Tune Cycles can supply, fit and set up SRAM components and lodge any warranty assessment on your behalf — book at tunecycles.com.au/book.

  • SRAM X-SYNC Road Direct Mount chainring (CR-XSNC-DM-E1), Rival E1 black
  • 40 teeth, 1x
  • 8-bolt direct mount, 6.5mm offset
  • X-SYNC wide-tooth, narrow-tooth chain retention
  • Aluminium, black
  • 12 and 13-speed; SRAM Road Flattop chain
  • 8 chainring bolts included
BrandSRAM
ModelX-SYNC Road Direct Mount (CR-XSNC-DM-E1), Rival E1
SRAM part number00.6218.064.001
Teeth40T
Drivetrain1x
MountDirect mount, 8-bolt
Offset6.5mm
Speeds12, 13
ChainSRAM Road Flattop (also listed for Eagle and T-Type)
MaterialAluminium
ColourBlack
Included8 chainring bolts
SKU PSI-SR006218064001
Brand SRAM
Shipping Weight 0.2500kg
Shipping Width 0.160m
Shipping Height 0.060m
Shipping Length 0.220m