A replacement 46/33T chainring set for SRAM's Rival AXS E1 2x cranks. The two rings are a single one-piece aluminium assembly that bolts to the crank's 8-bolt direct-mount interface, and the smaller 46/33T pairing suits gravel, climbing and all-day riding.

Highlights

  • 46/33T one-piece chainring assembly
  • 13-tooth difference between rings, as on all SRAM's 12-speed 2x pairings
  • 8-bolt direct mount, 0mm offset
  • Aluminium, black
  • 12-speed SRAM Road Flattop chains

Why a 13-tooth gap

SRAM uses a 13-tooth step on its 12-speed 2x rings so front shifts are precise and the change in cadence is smaller than a traditional big jump.

Compatibility and fit

For SRAM Rival AXS E1 2x cranksets without a power meter (SRAM's 'non-power' kit). It needs a SRAM 12-speed Flattop chain and a matching AXS 2x front derailleur set-up. Check your crank uses the 8-bolt direct-mount interface; fitting needs Torx tools and the correct torque, or a workshop.

This SRAM component is covered by SRAM’s warranty against defects in materials and workmanship; terms are set by SRAM. Wear and service items (chains, cassettes, brake pads, rotors, tape and seals) are normal maintenance parts.

Tune Cycles can supply, fit and set up SRAM components and lodge any warranty assessment on your behalf — book at tunecycles.com.au/book.

  • SRAM Rival 2x Chainring Kit (CR-RIV-KIT-E1)
  • 46/33T, 13-tooth delta
  • One-piece direct-mount construction
  • 8-bolt mount interface, 0mm offset
  • Aluminium, black
  • 12-speed; SRAM Road Flattop chain
  • For Rival AXS E1 non-power-meter cranks
BrandSRAM
ModelRival 2x Chainring Kit (CR-RIV-KIT-E1)
SRAM part number00.6218.062.000
Teeth46/33T
Drivetrain2x
MountDirect mount, 8-bolt
Offset0mm
Speeds12
ChainSRAM Road Flattop D1/E1
MaterialAluminium
ColourBlack
Power meterNo (non-power version)
SKU PSI-SR006218062000
Brand SRAM
Shipping Weight 0.2500kg
Shipping Width 0.160m
Shipping Height 0.060m
Shipping Length 0.220m