A replacement 48/35T chainring set for SRAM Force AXS E1 power meter cranksets, an all-round road pairing. Thread Mount rings screw onto the power meter rather than bolting to a spider, which SRAM says keeps weight down while keeping the system stiff and the power readings accurate.

Highlights

  • 48/35T 2x chainring kit, 13-tooth difference
  • Thread Mount interface for Force AXS E1 power meter cranks
  • Aluminium, black
  • 12-speed SRAM Road Flattop chains
  • Thread back-up pin and screw included

Fitting

Thread Mount rings need SRAM's Thread Mount Chainring Removal Tool to install and remove; once you have it, ring swaps are quick.

Compatibility and fit

For SRAM Force AXS E1 2x cranksets with the Thread Mount power meter. It won't fit direct-mount (non-power) cranks. Runs SRAM 12-speed Flattop road chains with an AXS 2x front derailleur. If you don't have the tool, a workshop can fit it.

This SRAM component is covered by SRAM’s warranty against defects in materials and workmanship; terms are set by SRAM. Wear and service items (chains, cassettes, brake pads, rotors, tape and seals) are normal maintenance parts.

Tune Cycles can supply, fit and set up SRAM components and lodge any warranty assessment on your behalf — book at tunecycles.com.au/book.

  • SRAM Force Thread Mount 2x Chainring Kit (CR-FRC-TMKT-E1)
  • 48/35T chainring combination
  • Thread Mount interface for power meter cranks
  • Aluminium, black, 0mm offset
  • 12-speed; SRAM Road Flattop chain
  • Includes thread back-up pin and screw
  • Needs the SRAM Thread Mount Chainring Removal Tool
BrandSRAM
ModelForce Thread Mount 2x Chainring Kit (CR-FRC-TMKT-E1)
SRAM part number00.6218.063.001
Teeth48/35T
Drivetrain2x
MountThread Mount
Offset0mm
Speeds12
ChainSRAM Road Flattop D1/E1
MaterialAluminium
ColourBlack
IncludedThread back-up pin and screw
SKU PSI-SR006218063001
Brand SRAM