A 30-tooth steel replacement chainring for SRAM 3-bolt direct mount cranks, with a 3mm offset and SRAM’s X-SYNC tooth profile for 12-speed Eagle 1x drivetrains. It comes with three mounting bolts.

Highlights

  • 30T, steel, black
  • Direct mount, 3-bolt interface, 3mm offset
  • 12-speed 1x; works with Eagle and 11-speed chains
  • Three mounting bolts included

Compatibility and fit

For SRAM cranks with a 3-bolt direct mount chainring interface. SRAM pairs the 3mm offset with Boost chainline on its direct mount cranks, so check your frame and crank before ordering. SRAM notes it is not compatible with XX T-Type bash guards. Fit with the right Torx key and SRAM’s torque spec, or have our workshop fit it.

This SRAM component is covered by SRAM’s warranty against defects in materials and workmanship; terms are set by SRAM. Wear and service items (chains, cassettes, brake pads, rotors, tape and seals) are normal maintenance parts.

Tune Cycles can supply, fit and set up SRAM components and lodge any warranty assessment on your behalf — book at tunecycles.com.au/book.

  • 30T steel chainring, black
  • Direct mount, 3-bolt interface
  • 3mm offset
  • 12-speed, 1x; Eagle and 11-speed chain compatible
  • Not compatible with XX T-Type bash guards
  • Three mounting bolts included
BrandSRAM
ModelEagle Chainrings (CR-XSNC-DM-F1)
SRAM part number11.6218.079.003
Teeth30T
MountDirect mount, 3-bolt
Offset3mm
MaterialSteel
ColourBlack
Speeds12
Drivetrain1x
Chain compatibilityEagle, 11-speed
Bolts3 included
SKU PSI-SR116218079003
Brand SRAM
Shipping Weight 0.2500kg
Shipping Width 0.160m
Shipping Height 0.060m
Shipping Length 0.220m