PRO LT Stem 31.8mm 60mm / 0°
SKU code: SHM-PRSS0547
In Stock
Dial in your riding position with the PRO LT Stem, a tough anodised alloy stem whose reversible angle lets you switch between an aggressive, aerodynamic stance and a more upright, comfortable one. The four-bolt Headlock faceplate clamps your bar securely and evenly, so you can ride with confidence on road, gravel or trail.
Highlights
- Reversible ±0°, ±6°, ±17° and ±35° angle lets you raise or drop your front end without buying a new stem
- Four-bolt Headlock faceplate spreads clamping force evenly for a secure, bar-friendly hold
- Anodised 6061 alloy construction balances strength, stiffness and value
- 40mm, 50mm, 60mm, 70mm, 80mm, 90mm, 100mm, 110mm and 120mm length and 31.8mm bar clamp suit a wide range of road and off-road setups
- Clean black anodised finish that works with almost any frame
Reversible angle, two positions
Run the stem angled up for a relaxed, endurance-friendly position, or flip it to the −0°, ±6°, ±17° and ±35° orientation for a lower, racier front end. One stem covers two very different fits, so you can fine-tune your setup as your flexibility, goals or bike change.
Headlock faceplate
The four-bolt Headlock front clamp distributes pressure evenly across the handlebar, helping keep the bar held firmly in place and reducing the risk of uneven loading on your bars.
Built to last
Machined from anodised 6061 aluminium, the LT Stem is a dependable, hard-wearing choice for daily riding and varied conditions.
Compatibility & fit
- Bar clamp diameter: 31.8mm — suits standard 31.8mm road, gravel and MTB handlebars
- Steerer clamp: 1-1/8 inch (Ahead / threadless)
- Length: 40mm, 50mm, 60mm, 70mm, 80mm, 90mm, 100mm, 110mm and 120mm
- Angle: ±0°, ±6°, ±17° and ±35° (reversible)
Check your handlebar clamp diameter and steerer size before fitting. We recommend fitting by a qualified mechanic and tightening bolts to the manufacturer's torque specification with a torque wrench.
Options
Available in 19 length / angle options: 40mm / 0°, 50mm / 0°, 60mm / 0°, 60mm / ±6°, 60mm / ±17°, 70mm / ±6°, 70mm / ±17°, 70mm / ±35°, 80mm / ±6°, 80mm / ±17°, 90mm / ±6°, 90mm / ±17°, 90mm / ±35°, 100mm / ±6°, 100mm / ±17°, 110mm / ±6°, 110mm / ±17°, 120mm / ±6° and 120mm / ±17°. Select yours from the dropdown above.
PRO components are covered by the manufacturer's warranty against defects in materials and workmanship. This warranty does not cover normal wear and tear, crash damage, improper installation, or damage caused by exceeding recommended torque specifications.
For warranty support, return the item to Tune Cycles and we'll manage the claim for you. This warranty is in addition to your rights under the Australian Consumer Law, which entitles you to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage.
- Four-bolt Headlock front clamp for secure, even bar fixation
- Anodised 6061 alloy construction
- 31.8mm handlebar clamp diameter
- 1-1/8 inch (Ahead) steerer clamp
- Black anodised finish
- Multi-discipline: suits road, gravel and MTB
- Available in 19 length / angle options: 40mm / 0°, 50mm / 0°, 60mm / 0°, 60mm / ±6°, 60mm / ±17°, 70mm / ±6°, 70mm / ±17°, 70mm / ±35°, 80mm / ±6°, 80mm / ±17°, 90mm / ±6°, 90mm / ±17°, 90mm / ±35°, 100mm / ±6°, 100mm / ±17°, 110mm / ±6°, 110mm / ±17°, 120mm / ±6° and 120mm / ±17°.
| Brand | PRO |
| Model | LT Stem |
| Length | 40mm, 50mm, 60mm, 70mm, 80mm, 90mm, 100mm, 110mm and 120mm |
| Handlebar clamp diameter | 31.8mm |
| Steerer clamp diameter | 1-1/8 inch (Ahead / threadless) |
| Angle | 0°, ±6°, ±17° and ±35° |
| Front clamp | Four-bolt Headlock faceplate |
| Material | Anodised 6061 alloy |
| Finish / colour | Black |
| Discipline | Road / gravel / MTB |
| SKU | SHM-PRO-LT-STEM |
| Brand | PRO |
