A bent hanger makes a good derailleur shift badly. FUNN's UDH hanger is a CNC-machined replacement for any frame built to SRAM's Universal Derailleur Hanger standard, with coloured bolt hardware so your spare can match the rest of the build.

Highlights

• CNC-machined from 6061 alloy
• Fits frames built to the UDH standard
• Black anodised body with your choice of bolt colour
• Locates off the dropout and is clamped by the thru-axle, so there is no alignment step
• Shaped to rotate back out of the way under impact rather than snap, as the UDH standard intends

Why carry a spare

A derailleur hanger is meant to be the part that gives way, so the frame and derailleur survive a crash or a drive-side hit. Replace it after any solid impact, when shifting goes vague or noisy for no other reason, or if you can see a bend, a crack or damaged threads. Bending an old hanger back is not the fix; a new one is.

Colour options

The hanger body is black anodised on every version. The colour you choose is the bolt hardware, so you can pick up an accent already on the bike or choose black to keep it discreet. Fit and function are the same across all eight.

Compatibility & fit

• Frames built to the SRAM UDH standard: the hanger wraps the outside of the dropout and the rear thru-axle threads into it
• Conventional SRAM and Shimano rear derailleurs on a UDH frame
• SRAM Eagle 90 and Eagle 70 Transmission, which mount on the UDH hanger
• Not needed with full-mount T-Type groups (XX SL, XX, X0 and GX Eagle Transmission), which bolt direct to the frame
• Some aero road frames use the UDH name but differ from SRAM's spec; buy those hangers from the frame maker

Tighten to the figure in your frame manual. Our workshop can fit the hanger and set up your derailleur as a separate service.

Sizes & options