e*thirteen's tubeless rim tape stretches for an easy, snug-fitting install, carries a double layer of adhesive for a strong seal around the valve, and peels off clean when it's time to replace it.

Highlights

  • Stretches for easy installation and a snug valve fit
  • Double layer of adhesive for maximum adhesion
  • Resists tearing during fitting
  • Peels off clean, without leaving a residue
  • Rated for MTB tyre pressures: 50psi max with two wraps

Choosing a width

As a rule of thumb, e*thirteen recommends a tape width about 2mm wider than the rim's internal width, so the tape fully covers the rim bed and seals cleanly at the edges. If you're not sure which width your rim needs, the Tune workshop can check it for you.

Options

WidthRoll lengthWhat differs
26mm8m or 40mFor narrower rims; confirm against your rim's internal width
28mm8m or 40mSuits rims with a 26–28mm internal width
30mm8m or 40mSuits rims with a 28–30mm internal width
32mm8m or 40mSuits rims with a 30–32mm internal width

Compatibility & fit

MTB tubeless tape, rated to 50psi with two wraps; for higher-pressure gravel or road setups e*thirteen makes a separate high-pressure gravel tape. An 8m roll tapes two wheels; a 40m roll tapes ten.

e*thirteen's Infinite Ride warranty covers this product for 10 years against manufacturing and material defects, to the original owner with proof of purchase. This is in addition to your rights under the Australian Consumer Law, so keep your proof of purchase. For warranty support, return the product to Tune Cycles and we'll manage the claim with e*thirteen's Australian distributor.
Stretches for an easy, snug install, Double layer of adhesive for a strong seal, Resists tearing; peels off clean, MTB rated: 50psi max with two wraps, 8m roll tapes 2 wheels, 40m roll tapes 10 wheels
ColourSeafoam
CompatibilityMTB – 50psi max with two wraps
Roll length8m (tapes 2 wheels) or 40m (tapes 10 wheels)
Width guideChoose a width about 2mm wider than your rim's internal width
SKU DTW-ETG-RT-PAR
Brand e*Thirteen