Shimano MT410 front hydraulic disc brake, right lever

A complete front hydraulic disc brake for mountain bikes: BL-MT401 lever, BR-MT410 two-piston caliper, hose already fitted and the system bled and ready to bolt on. This is the right-hand lever, which on an Australian-delivered bike operates the front brake.

Highlights

Complete front brake: BL-MT401 lever and BR-MT410 caliper, assembled with a 1000 mm hose
Anodised alloy two-finger lever
Minimum lever reach of 75 mm, so it suits smaller hands
Lightweight two-piston caliper with quick piston retraction
Resin pads without cooling fins, fitted
Funnel bleeding with Shimano mineral oil

Power and feel tuned for trail riding

Shimano sets the braking power on the MT410 for riders getting into mountain biking rather than for racers, so it is progressive rather than sharp off the top. Modulation is the strong point: you get the power when you pull for it, without the front wheel snatching.

Compatibility and fit

Post mount caliper, supplied without an adapter, for a post mount fork. Check which rotor size your fork and frame allow and buy the matching adapter separately if you need one. The rotor is not included. Uses Shimano hydraulic mineral oil only, never DOT fluid. Supplied in black. We can fit and bleed it for you at the Marrickville workshop.

Shimano warrants this brake against defects in materials and workmanship. Normal wear is excluded, which on a hydraulic disc brake means brake pads, hose wear and the mineral oil itself, along with damage from crashes, incorrect fitting, contaminated pads or the use of any fluid other than Shimano hydraulic mineral oil.

Warranty claims and returns are handled by Tune Cycles. Contact us with your order number, send the part back to us, and we will assess it and lodge the claim with the distributor on your behalf. Please do not send the part to Shimano directly.

Front brake set: BL-MT401 lever with BR-MT410 caliper
Right-hand lever (front brake, Australian convention)
1000 mm hose, assembled and bled
Two-piston caliper
Anodised alloy two-finger lever
Minimum lever reach 75 mm
Resin pads without fins, fitted
Funnel bleeding
Shimano hydraulic mineral oil
Post mount caliper, no adapter supplied
Black

Lever	BL-MT401
Caliper	BR-MT410, 2-piston
Position	Right lever / front brake
Hose length	1000 mm
Pads supplied	Resin, without cooling fins
Adapter	Not supplied; for post mount fork
Caliper mount	Post mount
Minimum lever reach	75 mm
Fluid	Shimano hydraulic mineral oil
Bleed method	Funnel bleeding
Colour	Black
Rotor	Not included

SKU	SHM-EMT4102JRFPRA100
Barcode #	4550170621599
Brand	Shimano
Shipping Weight	0.3000kg
Shipping Cubic	0.001000000m3
Unit Of Measure	each

Must be installed and serviced by qualified bicycle mechanic

More From This Category

Shimano BB-UN300 Bottom Bracket 73x122mm with Fixi

RRP ~~$39.99~~ $31.19

Adaptor A7 180-203 Pm/Pm w/BOLTS, Quality Tektro p

$15.07

Shimano ALTUS FC-M315-2 Crankset

From $39.47

Pedals 1/2" Kids 12-16" bikes

$13.69

SRAM DUB BSA Bottom Bracket Wrench (3/8th" ratchet

$57.00

Clarks VX/VRX/VRS863 Disc Brake Pads

$15.99

Shimano RD-FT35 REAR DERAILLEUR 6/7-SPEED SHORT CA

RRP ~~$28.89~~ $22.54

WTB Rocket Saddle, Steel, Medium Fusion

$89.99

Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Tune Cycles’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.

The term ‘Tune Cycles’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is 54/76B Edinburgh Road, MARRICKVILLE, NSW, 2204, AU. Our ABN is 84 611 693 513. The term ‘you’ refers to the user or viewer of our website.

The use of this website is subject to the following terms of use:

The content of the pages of this website is for your general information and use only. It is subject to change without notice.
Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on this website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
This website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
All trademarks reproduced in this website, which are not the property of, or licensed to the operator, are acknowledged on the website.
Unauthorised use of this website may give rise to a claim for damages and/or be a criminal offence.
From time to time, this website may also include links to other websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the website(s). We have no responsibility for the content of the linked website(s).
Your use of this website and any dispute arising out of such use of the website is subject to the laws of Australia.

Description

Shimano MT410 front hydraulic disc brake, right lever

Highlights

Power and feel tuned for trail riding

Compatibility and fit

Warranty

Features

Specifications

Terms and Conditions

More From This Category

for news and special member-only offers and discounts

Terms & Conditions

Privacy Policy