The Eagle 70 Transmission E-MTB crank is a robust, tidy arm set for pedal-assist mountain bikes, built around an ISIS spindle interface. This is the 170mm length in black.

Highlights

  • Aluminium crank arms, 170mm, black
  • ISIS spindle interface
  • M15 self-extracting crank bolts
  • 33mm crankset offset
  • Listed by SRAM for the SRAM Powertrain drive unit

Compatibility and fit

SRAM lists this part for SRAM Powertrain eMTBs. Arms only: the chainring and bottom bracket are not included, and there is no gap cap. Fitting needs the right tools and SRAM's manual, or book it with Tune Cycles.

This SRAM component is covered by SRAM’s warranty against defects in materials and workmanship; terms are set by SRAM. Wear and service items (chains, cassettes, brake pads, rotors, tape and seals) are normal maintenance parts.

Tune Cycles can supply, fit and set up SRAM components and lodge any warranty assessment on your behalf — book at tunecycles.com.au/book.

  • SRAM Eagle 70 Transmission E-MTB crank assembly (FC-70-PA-A1)
  • 170mm aluminium arms
  • ISIS spindle interface
  • M15 self-extracting bolts
  • 33mm offset
  • SRAM Powertrain
  • Black
BrandSRAM
ModelEagle 70 Transmission E-MTB (FC-70-PA-A1)
SRAM part number00.6118.703.002
Crank arm length170mm
Crank arm materialAluminium
ColourBlack
Spindle interfaceISIS
Crankset offset33mm
Drive unitSRAM Powertrain
Gap capNo
Not includedChainring, bottom bracket
SKU PSI-SR006118703002
Brand SRAM
Shipping Weight 0.4000kg
Shipping Width 0.250m
Shipping Height 0.100m
Shipping Length 0.400m