RockShox's own fork service vise blocks: a pair of blocks with eight clamping profiles from 8mm to 34mm, for holding fork parts securely in a bench vise during service.

Highlights

  • Eight profiles: 8, 10, 14, 25, 27.3, 29.1, 30.6 and 34mm
  • Flat section at one end
  • B1 version of RockShox's fork vise blocks
  • Listed by SRAM as a fork service tool

In the workshop

The blocks sit in the jaws of a bench vise. Use them as directed in the RockShox service manual for your fork, which sets out each step and the tools it needs.

Compatibility and fit

SRAM lists these blocks in the tool sections for Lyrik E1 (2027+), ZEB B1 (2027+) and BoXXer D1+ (2024+) forks. A bench vise is needed. RockShox makes separate vise blocks for rear shocks and Reverb posts.

This RockShox component is covered by SRAM/RockShox’ warranty against defects in materials and workmanship; terms are set by RockShox. Suspension wear and service items (seals, oil, air cans, bushings and springs) are normal maintenance parts.

Tune Cycles can fit this part, set it up correctly and lodge any warranty assessment on your behalf — book at tunecycles.com.au/book.

  • Genuine RockShox fork service tool
  • B1 version
  • Clamping profiles: 8, 10, 14, 25, 27.3, 29.1, 30.6 and 34mm
  • Flat section at one end
  • Fits in a standard bench vise
  • Listed for Lyrik E1, ZEB B1 and BoXXer D1+ service
BrandRockShox
ModelUniversal Fork Vise Blocks (TL-FST-VB-B1)
SRAM part number00.4318.111.000
Product typeFork service vise blocks
VersionB1
Clamping sizes8, 10, 14, 25, 27.3, 29.1, 30.6, 34mm
ApplicationFront suspension service
SKU PSI-RX004318111000
Brand RockShox