No suitable ceiling? Mount Drift on a structural wall instead. This kit holds the rail out from the wall so your bikes still hang by the wheel and slide side to side.

Highlights

  • Two wall brackets and two support bars, with fixings
  • Three rail positions: 350, 560 or 770 mm from the wall
  • Rated to 120 kg with a Drift 4-Bike system
  • For timber, brick, concrete, block or steel structures
  • Black powder-coated 3 mm steel plate
  • Built-in bottle opener doubles as a helmet hanger

What's in the box

  • 2 x wall mount brackets
  • 2 x support bars
  • 8 x M8 x 60 mm indented hex washer screws
  • 8 x metal wall anchors for concrete or Hebel block
  • 2 x M6 x 60 mm hex socket cap screws with washers
  • 2 x M6 flat nuts
  • 8 x M6 x 18 mm socket head bolts
  • 8 x M6 nyloc nuts with washers
  • 8 x plastic nut caps

Planning the install

Raider calls for at least two brackets per rail, 600-1000 mm apart, with no more than 400 mm from the end of the rail to the nearest bracket. You'll need a drill, spirit level, tape measure, 13 mm socket or spanner and a 5 mm Allen key.

Compatibility & fit

An add-on for the Drift 4-Bike Storage System; the rail and hooks are not included. Fix it to a load-bearing wall such as timber framing, masonry, concrete or steel, never plasterboard alone. Raider rates the kit to 120 kg with a Drift 4-Bike system and each hook to 30 kg. Indoor use only.

Covered by Raider Bike Co's manufacturer warranty against defects. For warranty support, return the product to Tune Cycles and we'll manage the claim with KWT Imports, Raider Bike Co's Australian distributor.
  • Two powder-coated steel wall brackets
  • Three wall offset positions
  • Rated to 120 kg with a Drift 4-Bike system
  • Fixings for timber, concrete and Hebel
  • Bottle opener and helmet hanger
SystemDrift
Contents2 wall brackets, 2 support bars, fixings
MaterialPowder-coated steel, 3 mm plate
FinishBlack
Rail offset from wall350, 560 or 770 mm
Load rating120 kg with a Drift 4-Bike system
Brackets per railAt least 2
Bracket spacing600-1000 mm centres
Wall typesTimber framing, brick, concrete, block or steel
UseIndoor only
Part numberRASTDWM01BL
SKU KWT-BR-RASTDWM01BL
Brand Raider Bike Co
Shipping Weight 0.3000kg
Shipping Width 0.160m
Shipping Height 0.060m
Shipping Length 0.220m