PRO Discover Stem 10 - 100mm / 31.8mm / Black
SKU code: SHM-PRSS0629
In Stock
Built for gravel and adventure riding, the PRO Discover Stem 10 gives you a confident, controlled front end with a reinforced clamp that holds wide gravel bars rock-steady over rough terrain. Its flippable ±10° angle lets you fine-tune your reach and height, while the full-cover faceplate keeps the cockpit clean and helps tidy up internal cable routing.
Highlights
- Stable, reinforced 31.8mm clamp designed for wider gravel handlebars
- Flippable ±10° angle to dial in a relaxed or more aggressive position
- Forged and CNC-machined AL-7075 alloy for strength on demanding terrain
- Full-cover faceplate with a cable-exit gap for neat internal routing
- Ready for electronic shift wiring and the PRO Computer Mount
Strength where it counts
The body is 3D forged and then CNC machined from AL-7075 alloy, a high-strength grade chosen to handle the loads of off-road riding. The bulked-up clamping area is shaped to support the wider bars common on gravel bikes, so steering stays precise even when the surface gets loose.
Dial in your fit
With a flippable ±10° angle, you can run the stem rising or dropping to suit your riding position. This 100mm length lets you fine-tune reach, and the design is fully reversible so it works for both a comfortable, upright setup and a lower, racier one.
Clean, integrated cockpit
The faceplate fully covers the top of the clamp for a tidy look and a deliberate gap in the lower section lets cables routed through a compatible handlebar exit cleanly. It is set up for electronic shift wiring and accepts the PRO Computer Mount for an uncluttered front end.
Compatibility & fit
- Handlebar clamp: 31.8mm
- Steerer / fork diameter: 1 1/8" (28.6mm)
- Length: 100mm
- Angle: ±10° (flippable)
- Compatible with electronic (Di2) shift wiring
- Compatible with the PRO Computer Mount
- Faceplate bolts use a T25 fitting; PRO's recommended torque is 5Nm
Clean cable routing through the faceplate gap requires a handlebar designed for internal routing.
PRO components are covered by the manufacturer's warranty against defects in materials and workmanship. The warranty does not cover normal wear and tear, crash damage, improper installation, or use outside the product's intended purpose. Observe the recommended faceplate bolt torque (5Nm) and ensure the stem is suited to your steerer and handlebar before use.
For warranty support, return the item to Tune Cycles and we'll manage the claim for you.
This warranty is in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.
- Gravel-focused alloy stem with a reinforced 31.8mm handlebar clamp
- 3D forged and CNC-machined AL-7075 alloy construction
- Flippable ±10° angle to tune reach and height
- 100mm length
- Full-cover faceplate for a clean look and reduced water ingress
- Lower faceplate gap routes cables from a compatible internally-routed handlebar
- Compatible with electronic (Di2) shift wiring
- Accepts the PRO Computer Mount
- T25 faceplate bolts, 5Nm recommended torque
- Black finish
| Brand | PRO |
| Model | Discover Stem 10 |
| Part number | PRSS0629 |
| Discipline | Gravel |
| Material | AL-7075 alloy, 3D forged and CNC machined |
| Handlebar clamp diameter | 31.8mm |
| Steerer diameter | 1 1/8" (28.6mm) |
| Length | 100mm |
| Angle | ±10° (flippable) |
| Weight | 166g (100mm) |
| Cable routing | Faceplate gap for internally-routed handlebars; electronic shift wire compatible |
| Accessory mount | PRO Computer Mount compatible |
| Faceplate bolts | T25, 5Nm recommended torque |
| Colour | Black |
| SKU | SHM-PRSS0629 |
| Barcode # | 8717009610773 |
| Brand | PRO |
