Invert Enduro is Cane Creek's moto-style inverted fork for mountain bikes. Big upper tubes, the bushings down near the axle and a keyed SquareLoc axle give a smooth, planted front end that grips through rough, loose and off-camber ground.

Highlights

  • Inverted single-crown chassis: 45mm upper tubes, 38mm stanchions
  • 170mm travel, 29in wheels only, 44mm offset
  • SquareLoc 15mm axle included, keyed to the dropouts and clamped by four pinch bolts
  • 2nd-gen Helm MKII monotube damper with high- and low-speed compression and low-speed rebound
  • Built to handle the weight, power and speed of modern e-MTBs
  • SideSwipe guards with sag marks, and ForkTuner app support

Why inverted

With the larger, stiffer tubes up top and the bushings closer to the axle, an inverted fork resists the fore/aft flex that causes binding and chatter. Cane Creek's SquareLoc axle adds the torsional stiffness an inverted fork needs: the included 15mm axle is rated at 17% more torsional stiffness than other inverted single-crown forks, and the optional 20mm axle at 42% (Cane Creek's figures).

Set-up and service

Air spring only, with a self-equalising charge port, onboard volume adjustment and bleed screws in the top caps. Cane Creek recommends 25% sag and lists a lower-leg service every 50 hours and a full air spring and damper rebuild every 100 hours or yearly. The Tune Cycles workshop can fit, set up and service the fork.

Compatibility & fit

29in wheels only, with a maximum tyre of 29 x 2.6in on a 30mm internal-width rim. Takes a 15x110 Boost front hub with the included axle, or 20x110 Boost with Cane Creek's 20mm SquareLoc axle (sold separately). Post-mount brake, 200mm rotor native (220mm with an adapter). Overbuilt 1-1/8in to 1.5in tapered steerer. Axle-to-crown is 586mm at 170mm travel; check your frame's rated fork length before ordering. Also available in 160mm and 180mm travel.

Cane Creek's Invert Enduro carries a two-year warranty against defects in materials and workmanship. Normal wear, crash damage, incorrect installation, modifications and damage from missed routine service aren't covered. For warranty support, return the product to Tune Cycles and we'll manage the claim with Cane Creek's Australian distributor. This is in addition to your rights under the Australian Consumer Law, so keep your proof of purchase.
  • Inverted single-crown fork, 38mm stanchions, 45mm upper tubes
  • 170mm travel, 29in, 44mm offset
  • SquareLoc 15mm axle included, 20mm optional
  • Helm MKII damper: HSC, LSC, LSR
  • Air spring with onboard volume adjustment
  • Built for enduro, bike park and e-MTB
  • 2-year warranty
BrandCane Creek
ModelInvert Enduro
Travel170mm
Wheel size29in only
Max tyre29 x 2.6in on a 30mm internal-width rim
AxleSquareLoc 15mm, 17-4 stainless, included (20mm available separately)
Hub spacing15x110 or 20x110 Boost
Offset44mm
Axle-to-crown586mm
Stanchion / upper tube38mm / 45mm
SpringAir, self-equalising, onboard volume adjustment
Damper2nd-gen Helm MKII monotube, bladder
AdjustmentsHSC, LSC, LSR, air pressure and volume
BrakePost mount, 200mm native (220mm with adapter)
Steerer1-1/8in to 1.5in tapered
Max air pressure150psi
Warranty2 years
SKU DTW-CSG-BCG0170
Brand Cane Creek