The Lumotec IQ-X E is the e-bike version of B&M's flagship headlight: 150 lux from a 6–60 V DC lighting output, the same road-shaped IQ-X beam, and a daytime running light. Not for dynamos.

Highlights

  • 150 lux from the e-bike's lighting output — the brightest IQ-X
  • Wide, road-shaped IQ-X beam with cut-off
  • Daytime running light
  • Blue light ring at the rear shows it is on
  • Aluminium housing; fork, handlebar or under-bar mounting

The IQ-X for e-bikes

Same optics and housing as the dynamo IQ-X, but driven by the e-bike's DC lighting circuit — so it makes 150 lux instead of 100. Switching is from the e-bike display; there is no sensor or standlight because the bike supplies the power.

E-bike (DC) only

Wired to the e-bike's lighting output: 6–60 V DC input, 7.5 W draw. It is switched from the e-bike's display or controller and must not be connected to a dynamo. Check your motor system's lighting output voltage before ordering — the Bosch, Shimano STEPS, Bafang and Yamaha outputs all sit in different places.

Fitted and wired in our workshop on request — book a dynamo or e-bike lighting install with Tune Cycles.

Busch & Müller lighting and mirrors are covered against defects in materials and workmanship. Damage from crashes, water ingress through an unsealed connection, connecting a DC e-bike light to a dynamo (or a dynamo light to an e-bike supply), and normal wear of brackets, straps and mirror glass aren't covered.

For warranty support, return the item to Tune Cycles with your proof of purchase and we'll manage the claim with the distributor for you. This cover is in addition to your rights under the Australian Consumer Law.

  • 150 lux from the e-bike's lighting output — the brightest IQ-X
  • Wide, road-shaped IQ-X beam with cut-off
  • Daytime running light
  • Blue light ring at the rear shows it is on
  • Aluminium housing; fork, handlebar or under-bar mounting
  • 6–60 V DC: covers 6 V, 12 V, 36 V, 42 V and 48 V lighting outputs
BrandBusch & Müller
ModelLumotec IQ-X E
Light output150 lux, low beam
Power6–60 V DC (e-bike), 7.5 W
MountingFork crown (aluminium bracket included), handlebar or under-bar
Dimensions55 × 46 × 54 mm
Weight120 g
HousingAluminium
Daytime running lightYes
Rear light outputNo
ApprovalStVZO (German road-traffic approved beam)
Article number164R60TS7-01 (EAN 4006021011298)
SKU BPW-0755
Model # 0755
Barcode # 4006021011298
Brand Busch & Müller
Shipping Weight 0.3000kg
Shipping Width 0.160m
Shipping Height 0.060m
Shipping Length 0.220m