Enduro

Enduro Bearings 15x24x5


We offer a full line of steel and ceramic bearings for almost any application. From headsets to hubs, wheels to suspension pivots, bottom brackets to jockey wheels...If it spins, Enduro Bearings is there.?

We also offer a whole line of Angular Contact (A/C) hub bearings. These bearings, when used in?a hub with?adjustable preload, eliminate all side play and last longer than standard radial bearings.

ABEC 3

Grade 10 Chromium Steel Balls:

High precision balls are within 10/1,000,000? round, twice as round as the industry standard, at it?s highest level.

52100 High Carbon Chromium Alloy Races:

Vacuum de-gassed process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-3 precision and noiseless movement.

Riveted Steel Retainer for toughness, ABEC-3 tolerances and noise tested, C-3 or C-N Internal Clearance

ABEC 5

Grade 5 Chromium Steel Balls

High precision balls are within 5/1,000,000? round. These are military level specification, used for precision equipment. R-64 hardness, of the highest grade.

52100 High Carbon Chromium Alloy Races

Vacuum de-gassing process for the purest chromium alloy steel, hardened to R-62, extremely tough and very durable. Polished to a mirror finish for ABEC-5 precision and noiseless movement.

Graphite/Nylon Ball Retainers

Nylon with graphite retainers are virtually frictionless while providing constant lubrication.

The ABEC 5 Standard

To meet the ABEC-5 standard, bearing design must pass all tests, which include noise testing at high RPM, extremely close tolerances for I.D. and O.D., roundness of ball, trueness of the races and micro surface finishes of balls and races.

C-3 Clearance

This specification describes the internal clearance between the bearing and its race. For example, in a 10-18 I.D. bearing, our standard is 11-21 micrometers where as others use 11-25 micrometers.

All across the board, our bearings have higher standards of tolerance to ensure superior performance.

MAX BEARINGS

Designed specifically for suspension pivots, Enduro Bearings pioneered MAX type bearings almost 20 years ago for bicycles to address the challenges associated with mountain bike pivots. These bearings have 35-40% more load capacity than standard radial bearings. We accomplish this with a special design where the maximum number of balls are inserted into the bearing. The race grooves are deeper on these bearings for more lateral support for the twisting and multiple forces associated with mountain bike pivots. LLU seals give maximum protection against the elements, while keeping the 90% fill of Almagard Extra High Pressure Grease inside.

Also available now are MAX BO bearings which get an additional Magnetite treatment for hardness, rust resistance and even more reliability.

We also make Angular Contact MAX type bearings, in both sealed and greaseable types. These bearings are spec'd on some of the best mountain bikes available, and you can also get them from us for replacement, or for building your own custom mountain bike. We supply to almost 100 companies with bearings of various designs. We work directly with frame builders to get every detail right.

Angular Contact Bearings

We produce a line of Angular Contact (A/C) cartridge bearings specifically designed for hubs. In standard radial bearings, only 3 or 4 balls make contact during the load, at any given time. In Angular Contact (A/C) bearings, ALL balls are engaged and spread the force over a larger surface area, to decrease friction and minimize wear. Wheel play can be adjusted out of the hub?providing?a more stable wheel, and making it easier to adjust disc brakes while still spinning freely.

NOTE: LOAD INNER RING ON THE ORANGE SEAL SIDE.

Stainless Steel Bearings

Enduro Bearings manufactures some series of bearings using 440C stainless steel balls and races. This material provides maximum corrosion resistance in applications and environments where critical. Depending on the application, they are designed to ABEC-3 or ABEC-5 tolerances. Stainless steel has 20% less load capacity than the 52100 chromium steel, used in most of our bearings, but with far superior corrosion resistance.

When the rain won?t go away, and your bicycle is more often used as a boat rather than a land craft, you may want to consider 440C stainless steel bearings. While a little softer than chromium bearing steel, 440C stainless steel is a good alternative in constant wet conditions, or where sweat becomes a problem such as headset bearings. Enduro Bearings uses LLB type seals and CRC Marine Grease in these bearings to additionally water proof against the elements.

XD-15 Ceramic Grade

Want to make your bike faster than any other? Had enough of servicing your ceramic bearings so that they will survive another rainy day race? Would you rather have a bottom bracket outlast your frameset? Then you have arrived at the solution. XD-15 ceramic bearings have it all -?hands down the speediest, and longest lasting ceramic bearing available on the market. Nitrogen steel is the secret, precision machined and ground to ABEC-5 tolerances at our facility in Gilroy, California. Voted ?Hands down the best bottom bracket we have ever tested? from Bike Radar, you can find out why. These bearings spin with the very least resistance of anything we have developed to date featuring oversized Grade 3 Silicon Nitride balls. On top of this, they will be spinning with the same ease one year or even two years from now, with longer intervals between servicing. No one else in the bicycle industry offers this combination of speed and durability: XD-15 bearings for wheels, bottom brackets, and drive train.

ZER? Ceramic Grade

Proven time and again in World Cup race conditions, the ZER? Ceramic bearings are the ultimate race day weapon. Oversized Grade 3 balls roll on races which are ground to a mirror finish after receiving Magnetite and then Cryogenic treatments for hardness and longevity. More durable and with even lower rolling resistance than any 2RS bearings, they come closer to that magic ?zero? rolling resistance number. ?Enduro Bearings uses Silicone seals which are more slippery than rubber seals used by other ceramic bearing suppliers. We get more email and blog feedback on the ZER?'s than any other bearing, describing the noticed difference in downhill rolling speed. And they win the independent wattage output tests when stacked against the competition. If you want to buy raw speed, ZER? bearings are it.

Ceramic Hybrid (CH) ABEC-5 Grade

Ceramic bearings are not only here to stay, they are now the standard, period. When carbon fiber was first introduced, there were many riders still on steel bikes in the Tour de France, but now every racing bike is made of carbon fiber. This is the case for ceramic bearings, and the CH bearings are an excellent choice for?entry into the technology. ABEC-5 tolerances and LLB seals with Graphite Nylon retainers are premium features that are not available on our competitor?s ceramic hybrid bearings at two or even five times the cost. Oversized Silicon Nitride Grade 5 balls and cryogenic treatment of the ABEC-5 races ensure long lasting, smooth rolling bearings at great value. These are now also available in Angular Contact (A/C) design, for even greater durability and ultimate speed.

Stay Tuned

Book an Service with TUNE Cycles